Woodstock W1686 instruction manual Bevel Sanding Procedures

Page 25

Locking Handle

(1 of 2)

Figure 19. Use the lock handles to secure the table at the desired angle.

 

Sanding

 

Spindle

Table

Finish Line

Should Be Here

 

 

Workpiece

Figure 20. Mark the finish line on the longest edge of the workpiece. This allows the finish line to be viewed from the top of

the workpiece.

Bevel Sanding

Procedures

NOTICE

All of the general sanding rules that apply to standard sanding apply to bevel sanding.

NOTICE

Bevel sanding on a spindle sander is NOT an exact science. When the table is tilted to 45˚, the actual angle sanded on the edge of a workpiece will change if the workpiece is sanded at different positions around the spin- dle.

Adjust the table to the desired angle and secure it into position with the trunnion lock handles as shown in Figure 19. With the sander turned off, rotate the spindle by hand to ensure it does not make contact with the table insert.

When marking the finish line on your workpiece, always mark on the outside, or longest, edge of the bevel as shown in Figure 20. This allows the finish line to be viewed on the top side of the workpiece.

OPERATIONS

-23-

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Spindle Sander Page Table of Contents Introduction Woodstock Service And SupportAbout Your New Sander Machine Specifications Warranty And ReturnsStandard Safety Instructions SafetyDisconnect machine when cleaning, adjusting or servicing Keep proper footing and balance at all times Spindle Sander Additional Safety Instructions For SandersFigure B. Never touch a moving spindle Avoiding Potential Injuries110V Operation Electrical RequirementsExtension Cords Grounding220V Operation Unpacking Assembly InstructionsQty Clean Up Table/Trunnion GeneralDust Port To mount the spindle for sanding Sanding SpindleTo remove the spindle To change the sanding sleeve Sanding SleeveTable Insert To install the table insertPositive Stop Bolt AdjustmentsAdjustments Test Run OperationsTo test run the machine Standard Sanding Procedures Bevel Sanding Procedures Cleaning MaintenanceTable And Base Lubrication Sanding SleevesClosure 220VOLT W1686 Spindle Sander123 120 12073 115 116 119 121 XPN07 Pointer Page Page Page Warranty Card BOX BELLINGHAM, WA

W1686 specifications

The Woodstock W1686 is a versatile and innovative product that has gained recognition for its unique features and advanced technologies. As part of the Woodstock brand, known for its commitment to quality and performance, the W1686 stands out in various applications across different industries.

One of the main features of the W1686 is its robust construction, designed to withstand rigorous use while maintaining precision and reliability. Built with high-quality materials, the W1686 ensures durability, making it an excellent choice for both professional and personal use. This sturdy design not only enhances the product's longevity but also guarantees consistent performance even under demanding conditions.

The Woodstock W1686 integrates advanced technologies that elevate the user experience. One of its standout technological features is its user-friendly interface, which allows for easy operation and navigation. This intuitive design is particularly beneficial for new users, reducing the learning curve and making the product accessible to a wider audience. The W1686 also comes equipped with enhanced connectivity options, enabling seamless integration with various devices and platforms. This aspect is crucial for professionals who require efficient workflows and easy access to data.

Another notable characteristic of the W1686 is its emphasis on safety. The product is designed with numerous safety features that protect both the user and the equipment. This includes emergency stop mechanisms, protective housing, and user notifications for maintenance and operational checks. Such considerations ensure that users can operate the device with confidence, knowing that risk factors are minimized.

In terms of versatility, the Woodstock W1686 can be adapted for multiple applications. Whether used in woodworking, metalworking, or other industrial fields, its performance remains top-notch. This adaptability is a significant advantage for businesses looking to maximize their operational capacity without investing in multiple machines.

Furthermore, the W1686 also prioritizes efficiency. Its energy-saving technologies reduce power consumption without sacrificing performance, aligning with a growing trend toward sustainability in manufacturing and production processes. This focus not only benefits the environment but also lowers operational costs for users.

In summary, the Woodstock W1686 is a feature-rich product that combines durability, advanced technology, safety, and versatility. These characteristics make it an invaluable addition to any workspace, catering to the needs of both professionals and hobbyists alike.
Top Page Image Contents