Keep proper footing and balance at all times

12.Do not force tool. The machine will do a safer and better job at the rate for which it was designed.

13.Use correct tool. Do not force machine or attachment to do a job for which it was not designed.

14.Wear proper apparel. Do not wear loose clothing, neck ties, gloves, jewelry, keep long hair tied up, etc.

15.Remove adjusting keys and wrenches. Before turning the machine on, make it a habit to check that all adjusting keys and wrenches have been removed.

16.Use proper extension cord. Examine the extension cord to ensure it is in good condition. Use the chart below to determine the correct length and gauge of extension cord needed for your particular needs. The amp rating of the motor can be found on its nameplate. If the motor is dual voltage, be sure to use the amp rating for the voltage you will be using. If you use an extension cord with an undersized gauge or one that is too long, excessive heat will be generated within the circuit increas- ing the chance of a fire or damage to the circuit. Never use an extension cord that does not have a ground pin and connected ground wire. Immediately replace an extension cord if it shows any signs of damage.

17.Keep proper footing and balance at all times.

18.Do not leave machine unattended. Wait until it comes to a complete stop before leaving the area.

19.Perform machine maintenance and care. Follow lubrication and accessory attachment instructions in the manual.

20.Keep machine away from open flame. Operating machines near pilot lights and/or open flames cre- ates a high risk if dust is dispersed in the area. Dust particles and an ignition source may cause an explosion. Do not operate the machine in high-risk areas, including but not limited to, those men- tioned above.

21.If at any time you are experiencing difficulties performing the intended operation, stop using the machine! Then contact our service department or ask a qualified expert how the operation should be performed.

SAFETY

Extension Cord Requirements

	Length And Gauge
Amp Rating
Amp Rating	25ft	50ft	100ft
0-6	#18	#16	#16
7-10	#18	#16	#14
11-12	#16	#16	#14
13-16	#14	#12	#12
17-20	#12	#12	#10
21-30	#10	#10	No

Operating this equipment has the potential for flying debris to cause eye injury. Always wear safety glasses or goggles when operat- ing equipment. Everyday glasses or reading glasses only have impact resistant lenses, they are not safety glasses. Be certain the safety glasses you wear meet the appropri- ate standards of the American National Standards Institute (ANSI).

-5-

W1686 specifications

The Woodstock W1686 is a versatile and innovative product that has gained recognition for its unique features and advanced technologies. As part of the Woodstock brand, known for its commitment to quality and performance, the W1686 stands out in various applications across different industries.

One of the main features of the W1686 is its robust construction, designed to withstand rigorous use while maintaining precision and reliability. Built with high-quality materials, the W1686 ensures durability, making it an excellent choice for both professional and personal use. This sturdy design not only enhances the product's longevity but also guarantees consistent performance even under demanding conditions.

The Woodstock W1686 integrates advanced technologies that elevate the user experience. One of its standout technological features is its user-friendly interface, which allows for easy operation and navigation. This intuitive design is particularly beneficial for new users, reducing the learning curve and making the product accessible to a wider audience. The W1686 also comes equipped with enhanced connectivity options, enabling seamless integration with various devices and platforms. This aspect is crucial for professionals who require efficient workflows and easy access to data.

Another notable characteristic of the W1686 is its emphasis on safety. The product is designed with numerous safety features that protect both the user and the equipment. This includes emergency stop mechanisms, protective housing, and user notifications for maintenance and operational checks. Such considerations ensure that users can operate the device with confidence, knowing that risk factors are minimized.

In terms of versatility, the Woodstock W1686 can be adapted for multiple applications. Whether used in woodworking, metalworking, or other industrial fields, its performance remains top-notch. This adaptability is a significant advantage for businesses looking to maximize their operational capacity without investing in multiple machines.

Furthermore, the W1686 also prioritizes efficiency. Its energy-saving technologies reduce power consumption without sacrificing performance, aligning with a growing trend toward sustainability in manufacturing and production processes. This focus not only benefits the environment but also lowers operational costs for users.

In summary, the Woodstock W1686 is a feature-rich product that combines durability, advanced technology, safety, and versatility. These characteristics make it an invaluable addition to any workspace, catering to the needs of both professionals and hobbyists alike.