Emerson F-SERIES SENSOR installation manual Micro Motion cable gland and heat shrink

Page 18

Wiring

Figure 11 Micro Motion cable gland and heat shrink

3/4 in

(19 mm)

4 1/2 in

(114 mm)

	Gland nut	Gland clamping
	Gland nut	insert
		insert

7/8 in

(22 mm)

Shielded heat shrink

7/8 in

(22 mm)

Gland body

4.For connection at the core processor housing, prepare shielded cable as follows (for armored cable, omit steps d, e, f, and g):

a.Strip 4 1/2 inches (114 mm) of cable jacket.

b.Remove the clear wrap that is inside the cable jacket, and remove the filler material between the wires.

c.Remove the foil shield that is around the insulated wires, leaving 3/4 inch (19 mm) of foil or braid and drain wires exposed, and separate the wires.

d.Wrap the shield drain wire(s) around the exposed foil twice. Cut off the excess wire.

Figure 12 Wrapping the shield drain wires

e.Place the shielded heat shrink over the exposed shield drain wire(s). The tubing should completely cover the drain wires.

f.Without burning the cable, apply heat (250 °F or 120 °C) to shrink the tubing.

16	Sensor Installation: F-Series

Image 18

Contents Micro Motion Series Sensor Page Customer service TroubleshootingBefore You Begin Specifications Definitions European installationsInstallation options Series sensor with core processor Before You Begin Series sensor with junction box Series sensor with integrally mounted IFT9701 transmitter Before You Begin Full flow tubes Hazardous area installationsDetermining a Location Environmental limitsMount electronics remotely use junction box 176 140 UL and CSA ambient temperature limits Maximum process temperature in F CPipe run Maximum wiring distancesMaximum cable lengths ValvesFlow direction arrow Orienting the SensorSelf-draining applications Vertical pipelineMounting the Sensor Mounting an F-Series sensorElectronics mounting for high-temperature F-Series sensors Wiring Core processor to a 4-wire remote transmitterMicro Motion cable gland and heat shrink Applying the heat shrink Connecting the wires at the core processor Pressure Ratings at High Temperatures Series pressure ratings at high temperaturesGrounding Case purging procedure Purge FittingsRemoving a purge plug Time required to purge F-Series sensor cases Purge rate Time Sensor modelReturn Policy New and unused equipmentUsed equipment Page 20002298

F-SERIES SENSOR specifications

The Emerson F-Series Sensor is an innovative solution designed to enhance industrial processes through precise monitoring and control. Engineered for reliability and accuracy, the F-Series Sensor offers important features and technologies that cater to a wide range of applications, including temperature, pressure, and level measurement.

One of the standout characteristics of the F-Series is its exceptional measurement accuracy. The sensor provides high fidelity data essential for real-time monitoring, which can significantly improve process efficiency and safety. With an accuracy rating that meets or exceeds industry standards, the F-Series Sensor is designed to minimize operational risks while maximizing compliance with regulatory requirements.

Durability is another hallmark of the Emerson F-Series Sensor. Built with robust materials that resist corrosion and damage from harsh environments, the F-Series ensures longevity and consistent performance even in challenging conditions. This resilience is crucial for industries such as oil and gas, chemical processing, and water treatment, where sensors are exposed to extreme temperatures and pressures.

One of the key technologies integrated into the F-Series is predictive diagnostics. By utilizing advanced algorithms, the sensor can perform self-checks and predict potential failures before they occur. This proactive approach helps reduce maintenance costs and downtime, ensuring that operations can continue smoothly with minimal interruptions.

Moreover, the F-Series Sensor supports seamless integration with Emerson’s advanced automation systems. This compatibility allows for enhanced data analytics and visualization, empowering operators to make informed decisions based on real-time insights. With connectivity options such as wireless communication, the F-Series can easily be incorporated into existing systems, facilitating a transition to smarter manufacturing.

The F-Series is also designed with user-friendly features in mind. An intuitive interface simplifies the configuration and calibration process, allowing users to set parameters quickly and efficiently. Additionally, its compact form factor makes it easier to install in a variety of locations, providing versatile deployment options tailored to specific industrial needs.

In conclusion, the Emerson F-Series Sensor combines accuracy, durability, advanced technologies, and user-friendliness, making it an ideal choice for industries looking to enhance their operational capabilities. By leveraging these features, organizations can achieve better process management while ensuring safety and reliability in their operations.