Emerson F-SERIES SENSOR installation manual Connecting the wires at the core processor

Page 20

Wiring

Figure 16 Connecting the wires at the core processor

Terminal 1

Power supply + (Red wire)

Terminal 4

RS-485B (Green wire)

Terminal 3

RS-485A (White wire)

Terminal 2

Power supply – (Black wire)

Core processor housing internal ground screw

•For connections to earth ground (if core processor cannot be grounded via sensor piping and local codes require ground connections to be made internally)

•Do not connect shield drain wires to this terminal

7.Reinstall and tighten the core processor housing cover.

8.Additional wiring instructions for the transmitter can be found in the transmitter manual. Note: Never ground the 4-wire cable shield and shield drain wire(s) at the transmitter.

Junction box to a 9-wire remote transmitter or remote core processor

Follow the steps below to connect the 9-wire cable between the sensor and the transmitter or core processor.

1.Prepare and install the cable according to the instructions in Micro Motion’s 9-Wire Flowmeter Cable Preparation and Installation Guide.

2.Insert the stripped ends of the individual wires into the terminal blocks. No bare wires should remain exposed.

3.Match the wires color for color. For wiring at the transmitter or remote core processor, refer to the transmitter documentation.

4.Tighten the screws to hold the wires in place.

5.Ensure integrity of gaskets, then tightly close and seal the junction box cover and all housing covers on the transmitter or core processor.

18

Sensor Installation: F-Series

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Micro Motion Series Sensor Page Before You Begin Customer serviceTroubleshooting Installation options Specifications DefinitionsEuropean installations Series sensor with core processor Before You Begin Series sensor with junction box Series sensor with integrally mounted IFT9701 transmitter Before You Begin Hazardous area installations Determining a LocationFull flow tubes Environmental limitsMount electronics remotely use junction box 176 140 UL and CSA ambient temperature limits Maximum process temperature in F CMaximum wiring distances Maximum cable lengthsPipe run ValvesOrienting the Sensor Self-draining applicationsFlow direction arrow Vertical pipelineMounting the Sensor Mounting an F-Series sensorElectronics mounting for high-temperature F-Series sensors Wiring Core processor to a 4-wire remote transmitterMicro Motion cable gland and heat shrink Applying the heat shrink Connecting the wires at the core processor Grounding Pressure Ratings at High TemperaturesSeries pressure ratings at high temperatures Removing a purge plug Case purging procedurePurge Fittings Time required to purge F-Series sensor cases Purge rate Time Sensor modelUsed equipment Return PolicyNew and unused equipment Page 20002298

F-SERIES SENSOR specifications

The Emerson F-Series Sensor is an innovative solution designed to enhance industrial processes through precise monitoring and control. Engineered for reliability and accuracy, the F-Series Sensor offers important features and technologies that cater to a wide range of applications, including temperature, pressure, and level measurement.

One of the standout characteristics of the F-Series is its exceptional measurement accuracy. The sensor provides high fidelity data essential for real-time monitoring, which can significantly improve process efficiency and safety. With an accuracy rating that meets or exceeds industry standards, the F-Series Sensor is designed to minimize operational risks while maximizing compliance with regulatory requirements.

Durability is another hallmark of the Emerson F-Series Sensor. Built with robust materials that resist corrosion and damage from harsh environments, the F-Series ensures longevity and consistent performance even in challenging conditions. This resilience is crucial for industries such as oil and gas, chemical processing, and water treatment, where sensors are exposed to extreme temperatures and pressures.

One of the key technologies integrated into the F-Series is predictive diagnostics. By utilizing advanced algorithms, the sensor can perform self-checks and predict potential failures before they occur. This proactive approach helps reduce maintenance costs and downtime, ensuring that operations can continue smoothly with minimal interruptions.

Moreover, the F-Series Sensor supports seamless integration with Emerson’s advanced automation systems. This compatibility allows for enhanced data analytics and visualization, empowering operators to make informed decisions based on real-time insights. With connectivity options such as wireless communication, the F-Series can easily be incorporated into existing systems, facilitating a transition to smarter manufacturing.

The F-Series is also designed with user-friendly features in mind. An intuitive interface simplifies the configuration and calibration process, allowing users to set parameters quickly and efficiently. Additionally, its compact form factor makes it easier to install in a variety of locations, providing versatile deployment options tailored to specific industrial needs.

In conclusion, the Emerson F-Series Sensor combines accuracy, durability, advanced technologies, and user-friendliness, making it an ideal choice for industries looking to enhance their operational capabilities. By leveraging these features, organizations can achieve better process management while ensuring safety and reliability in their operations.
Top Page Image Contents