Installation Considerations, Packing Contents

Installation

2.0INSTALLATION

2.1Installation Considerations

The Liqui-tect panel must be installed indoors and may be mounted on the surface of a wall or flush- mounted, depending on the user’s application and the type of wall the unit will be mounted on. The unit’s location must meet the following criteria:

•The panel must be placed close enough to the areas to be monitored to permit proper connection of the leak detection cable. The panel will monitor two zones; each zone can accommodate up to 5,000 ft. (1524m) of leak detection cable.

•The Liqui-tect panel should be mounted where it can be easily accessed. Personnel would access the unit through the LCD on its front cover or through SiteScan.

•The site also must have electrical service and must permit connection of the panel’s four digital outputs, two inputs for leak detection cables and two analog outputs for connecting to a building management system or external alarm.

•The wall material must be capable of supporting the weight of the Liqui-tect panel: see 7.0 - Specifications.

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

2.1.1Unpacking and Preliminary Inspection

•Before unpacking the Liqui-tect panel, inspect the shipping carton for damage or signs of mishan- dling, such as gashes or holes in the carton or severely flattened corners.

•Open the shipping container carefully. Use care to avoid puncturing the container with sharp objects that might damage the contents.

•Inspect the Liqui-tect panel and all included components for damage.

•If any damage from shipping or mishandling is observed, immediately file a damage claim with the shipping agency and forward a copy to:

Liebert Corporation

1050 Dearborn Drive

P.O. Box 29186

Columbus, OH 43229

Packing Contents

Table 3 Packing manifest

Standard Components

Liqui-tect panel - large or small enclosure

User Manual

Keys (2) to panel door lock

Connection cables (2) (CONNECT10)

End terminators (2) (LT500-ET)

MC68HC16Z1 specifications

The Emerson MC68HC16Z1 is a versatile microcontroller that combines power and efficiency, making it an ideal choice for various embedded applications. As part of the Motorola 68HC16 series, the MC68HC16Z1 is designed to deliver robust performance while offering extensive support for both simple and complex tasks. With its 16-bit architecture, this microcontroller is well-equipped to handle a range of functionalities, from industrial control systems to automation processes.

One of the main features of the MC68HC16Z1 is its high-performance 16-bit CPU, which operates at speeds up to 20 MHz. This allows for efficient data processing and execution of instructions, which is critical in time-sensitive applications. The microcontroller boasts a rich instruction set, including various addressing modes that enhance programming flexibility. This versatility enables developers to implement efficient algorithms tailored to their specific application needs.

Power management is another noteworthy characteristic of the MC68HC16Z1. The device supports low-power operation modes, which is essential for battery-powered applications or scenarios where energy consumption is a concern. With its capability to switch between different operational states, the microcontroller can significantly extend battery life while ensuring that performance is not compromised.

The MC68HC16Z1 also includes an integrated analog-to-digital converter (ADC) that allows for direct interaction with analog signals. This feature is particularly beneficial in applications that require sensor data acquisition. Additionally, the microcontroller provides various communication interfaces, including serial communication options like UART and SPI, facilitating seamless data transfer between devices.

In terms of memory, the MC68HC16Z1 supports a wide range of options, including both RAM and ROM, allowing for flexible storage solutions depending on the application requirements. The built-in programmability further allows for updates and modifications to the firmware, ensuring that the system can adapt to evolving project specifications.

Moreover, the microcontroller features an extensive array of I/O ports, making it capable of interfacing with various peripheral devices such as sensors, actuators, and displays. This extensive connectivity enhances its usability in a range of applications, from robotics to automotive systems.

In summary, the Emerson MC68HC16Z1 microcontroller stands out for its balanced blend of performance, low power consumption, and feature-rich design. Its 16-bit architecture, integrated ADC, versatile communication interfaces, and extensive memory options make it a go-to choice for developers looking to create effective and reliable embedded systems. Whether for industrial automation or consumer electronics, the MC68HC16Z1 continues to be a dependable and powerful component in the realm of microcontroller technology.