Woodstock W1680 Avoiding Potential Injuries, Never drill, holding workpiece by hand

Page 8

AVOIDING POTENTIAL INJURIES

SAFETY

Figure 2. Never drill, holding workpiece by hand.

Figure 3. Keep fingers away from spinning tool.

Fig. 4. Remove Switch Safety Key when not in use.

Figure 5. Unplug machine when changing bulbs.

-7-

Image 8

Contents Drill Press Table Of Contents Woodstock Service and Support Introduction About Your NEW Drill PressWarranty and Returns Machine SpecificationsSafety First Additional Safety Instructions For Drill Presses Electrical Requirements 110V OperationExtension Cords GroundingAvoiding Potential Injuries Never drill, holding workpiece by handAssembly Instructions AssemblyBase/Column Secure base to floorTable Support Insert the pinion gear from the insideTable Support, Bottom of rack in positionHead Stock Align pocket in headstock with columnInstalling Light Bulb HandlesDrill Chuck and Arbor Chuck components identificationArbor Removal Seating arbor into spindleAdjustments Speed ChangeSpindle Adjustments More About Speed ChangesTable Adjustments Changing table height with crankOperations Test RunInstalling bit Drill Bit ChangesLubrication MaintenanceGeneral Table And Base Closure Possibility of mechanical damage orYour Notes Parts Base Slide BAR Warranty Card Woodstock INTERNATIONAL, INC

Related manuals

Manual 29 pages 56.23 Kb