DeVillbiss Air Power Company MG1-UMCCOMP-3 warranty Operating Procedures, Storage

Page 8

OPERATING PROCEDURES

1.Before attaching air hose or accessories, make sure the OFF/AUTO lever is set to “OFF” and the air regulator or shut-off valve is closed.

2.Attach hose and accessories.

TOO MUCH AIR PRESSURE CAUSES A HAZARDOUS RISK OF BURSTING. CHECK THE MANUFACTURER'S MAXIMUM PRESSURE RATING FOR AIR TOOLS AND ACCESSORIES. THE REGULATOR OUTLET PRESSURE MUST NEVER EXCEED THE MAXIMUM PRESSURE RATING.

When you are finished:

6.Set the “OFF/AUTO” lever to “OFF”.

7.Turn the regulator counterclockwise and set the outlet pressure to zero.

8.Remove the air tool or accessory.

9.Open the regulator and allow the air to slowly bleed from the tank. Close the regulator when tank pressure is approximately 20 psi.

10.Drain water from air tank.

3.Turn the OFF/AUTO lever to “AUTO” and allow tank pressure to build. Motor will stop when tank pressure reaches “cut-out” pressure.

4.Open the regulator by turning it clockwise. Adjust the regulator to the correct pressure setting. Your com- pressor is ready for use.

5.Always operate the air compressor in well-ventilated areas; free of gasoline or other solvent vapors. Do not operate the compressor near the spray area.

WATER WILL CONDENSE IN THE AIR TANK. IF NOT DRAINED, WATER WILL CORRODE AND WEAKEN THE AIR TANK CAUSING A RISK OF AIR TANK RUP- TURE.

NOTE

If drain cock valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

11.After the water has been drained, close the drain cock or drain valve. The air compressor can now be stored.

STORAGE

When you have finished using the air compressor:

1.Set the "ON/OFF" switch to "OFF" and unplug the cord.

2.Review the "Operating Procedures" section (page 9). Be sure to drain the water from the air tank.

3.Protect the electrical cord and air hose from damage by winding them loosely around the air compressor.

4.Store the air compressor in a clean and dry location.

8 - ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Permanently Lubricated AIR Compressor Limited Warranty ONE Year from Date of Purchase Important Safety Instructions Risk from Moving Pressure Switch is in the on Never Inhale AIR FromRisk to Breathing VentilationGlossary Duty CycleGeneral Information ON-RECEIPT InspectionInstallation and BREAK-IN Procedures Description of OperationGrounding Instructions Additional Regulators and Controls Operating Procedures StorageTroubleshooting Guide Troubleshooting Guide Permanently Lubricated AIR Compressor Service Notes DeVilbiss Air Power Company 213 Industrial Drive Jackson, TN

MG1-UMCCOMP-3 specifications

DeVilbiss Air Power Company has long been a trusted name in the air-powered tools and equipment industry, and the MG1-UMCCOMP-3 model is no exception. This air compressor combines advanced technology with robust design, making it ideal for a variety of applications, ranging from automotive to woodworking.

The MG1-UMCCOMP-3 is equipped with a powerful motor that ensures efficient performance. With a horsepower rating designed to deliver consistent air pressure, the compressor can tackle demanding tasks with ease. Its compact design allows for versatile placement in workshops, garages, or job sites, while still providing an impressive output.

One standout feature of this model is its user-friendly controls, which make it accessible even for those who may not be familiar with operating air compressors. The gauges are clearly marked and easy to read, providing real-time feedback on pressure levels. This ensures that users can maintain optimal operating conditions and avoid any potential issues.

Another key characteristic of the MG1-UMCCOMP-3 is its quiet operation. This model has been engineered with noise-reduction technologies, making it significantly quieter than many traditional compressors. This feature is particularly beneficial for environments where noise levels need to be kept to a minimum, such as residential areas or enclosed workspaces.

Durability is a hallmark of DeVilbiss products, and the MG1-UMCCOMP-3 is built to withstand rigorous use. The components are made from high-quality materials, ensuring that the compressor can handle the wear and tear that comes with frequent operation. Its sealed design also helps protect against dust and debris, prolonging the lifespan of the machine.

Moreover, the MG1-UMCCOMP-3 includes safety features that prioritize user protection. An automatic shut-off function prevents overheating, and safety valves have been integrated to relieve pressure in case of excessive build-up. These features help ensure that users can operate the compressor with confidence and peace of mind.

In summary, the DeVilbiss Air Power Company MG1-UMCCOMP-3 air compressor stands out in the market with its powerful motor, user-friendly interface, quiet operation, and durable construction. Its combination of safety and efficiency makes it a top choice for both professional and amateur users alike, streamlining tasks and enhancing productivity across various applications. Whether you're inflating tires, operating pneumatic tools, or working on intricate projects, this air compressor provides the reliability needed for successful completion.
Top Page Image Contents