Installation of Glass Shades

(1) SWITCH HOUSING

	FAN SWITCH	ASSEMBLY
	CHAIN	ASSEMBLY
	CHAIN	WHITE WIRE
		WHITE WIRE
	BLUE WIRE	(3) WIRE
	BLUE WIRE	CONNECTORS
		CONNECTORS
	BLACK WIRE	WHITE WIRE

(4)CENTER (7) HEX NUT SCREW

(2) SCREWS

(8) LOCKWASHER

(6) LIGHT FITTER

4.Installation is complete. Turn electricity on at the main fuse or circuit breaker box.

NOTE: It is advisable to periodically check the tightness of the shade retainers. Fan operation may cause them to loosen.

SWITCH

HOUSING

	FAN SWITCH
FITTER	CHAIN

READ AND SAVE THESE INSTRUCTIONS

THIS OWNER’S MANUAL

COVERS EMERSON LIGHT KITS

USE THESE FIXTURES ONLY WITH EMERSON

Figure 4

9.Proceed to “Installation of “Glass

Shades” section.

CF AND F SERIES CEILING FANS.

NOTE: ANY LIGHT KIT OR FITTER AND GLASS COMBINATION

1.Remove shade retainer from socket. Seat shade in shade holder and screw shade retainer onto socket. Repeat for other two shades.

2.Install a 60-watt (maximum) intermediate base light bulb into each socket.

LIGHT SWITCH

CHAIN

SHADE HOLDER

THREADED

SOCKET

60-WATT (MAX.)

CHAIN PULL INTERMEDIATE BASE BULB (3)

COVERED BY THIS MANUAL WEIGHS 5.8 LBS. OR LESS.

Ceiling Fan Light Fixture Owner's Manual

!WARNING

To avoid fire hazard, do not exceed wattage indicated on the fixture.

Figure 5

3.Install chain pull onto the light switch chain.

For repair parts, phone:

1-800-654-3545

GLASS SHADE

SHADE RETAINER

LIMITED WARRANTY

What The Warranty Covers:

All products covered by this Owner’s Manual are warranted against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered.

What The Period Of Coverage Is:

All components are covered by this warranty for one year from the date you purchased your light fixture. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR.

What Will Emerson Electric Co. Do To Correct Problems:

Emerson Electric Co. will replace a defective Emerson Light Fixture at no charge to you. WE WILL SHIP THE REPAIRED PRODUCT OR REPLACEMENT TO YOU AT

NO CHARGE, BUT YOU ARE RESPONSIBLE FOR ALL COSTS OF REMOVAL, REINSTALLATION AND SHIPPING OF THE PRODUCT TO EMERSON.

How Can You Get Service:

YOU MUST HAVE PROOF OF YOUR PURCHASE OF THE LIGHT FIXTURE TO OBTAIN LIMITED WARRANTY SERVICE. KEEP YOUR RECEIPT OR OTHER PROOF OF PURCHASE. You can return the product to our factory or to your nearest authorized service center.

•To return the product to the factory, obtain a return authorization and service identification tag by writing to Air Comfort Products, Division of Emerson Electric Co., 8100 W. Florissant Ave., St. Louis, MO 63136. Include all model numbers shown on the product with your request.

•To return the product to an authorized service center, call 1-800-654-3545 for the address of the nearest authorized service center.

You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Light Fixture should be properly packed to avoid damage in transit since we will not be responsible for any such damage.

What Is Not Covered:

This warranty also does not cover any defects, malfunctions or failures caused by:

•Repairs by persons not authorized by Emerson Electric Co.,

•Use of parts or accessories not authorized by Emerson Electric Co.,

•Mishandling, improper installation, modifications or damage to your light fixture while in your possession, or

•Unreasonable use, misuse, abuse, including failing to do reasonable and necessary maintenance, and normal wear and tear. Additionally, this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when:

•The original purchaser or user ceases to own the product, or

•The ceiling fan is moved from its original point of installation.

This warranty is only valid within the 50 states of the United States and the District of Columbia. No other written or oral warranties apply, and no employee, agent, dealer or other person is authorized to give any warranties on behalf of Emerson Electric Co.

Air Comfort Products

DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant ¥ St. Louis, MO 63136

Part No. BP7254-2
Form No. F40BP72540002	Printed in China 09/06

REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE UNDER THIS WARRANTY AND EMERSON IS NOT RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES. Incidental damages include but are not limited to such damages as loss of time and loss of use. Consequential damages include but are not limited to the cost of repairing or replacing other property which was damaged if this product does not work properly.

How State Law Relates To The Warranty:

Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Form No. F40BP72540002	Part No. BP7254-2
	U.L. Model No.: LK37, LK800, LK801, LK803, F468

LK800, LK37, LK801, F468, LK803 specifications

Emerson's line of process controllers, including models LK803, F468, LK801, LK37, and LK800, reflects the company's commitment to providing advanced technology and reliable solutions for industrial applications. Each model boasts its own unique features, catering to various automation needs.

The LK803 is known for its versatile capabilities, offering precise temperature control alongside support for various input types. This model integrates advanced algorithms that ensure optimal performance, supporting both industries that require simple on/off control as well as those needing complex PID control. Its intuitive interface allows for easy programming and monitoring, making it suitable for both beginner and experienced users.

F468, on the other hand, stands out for its multifunctionality. It is capable of handling temperature, pressure, and flow measurements, making it an ideal choice for applications requiring real-time data collection. The F468 also features customizable alarm settings and output modules, enabling operators to set specific parameters to alert them in case of any potential issues. Its high-resolution display aids in providing clear visibility of operational data.

The LK801 is designed with an emphasis on user-friendliness and efficiency. With its advanced touch interface, operators can quickly navigate menus for configuration and monitoring. This model supports a range of protocols, including MODBUS and Profibus, allowing for seamless integration with existing systems. The LK801 also boasts powerful data logging capabilities, ensuring that all operational metrics are captured for future analysis.

In the realm of compact designs, the LK37 excels. This model is designed for space-limited installations while providing essential control functions. Its compact size does not compromise performance; it includes features such as a variety of input options and simple setpoint programming. The LK37 is geared towards industries needing efficient control without the need for extensive infrastructure.

Finally, the LK800 model is recognized for its rugged design and durability. Built to withstand harsh industrial environments, the LK800 is ideal for outdoor applications or regions exposed to extreme temperatures. It is equipped with advanced communication options and extensive protocol support, making it a reliable choice for networked environments.

Together, these Emerson models embody a range of technologies and characteristics tailored to meet diverse industrial needs, setting a standard for precision and reliability in process control. Their unique features make them suitable for a wide array of applications, from simple temperature regulation to complex monitoring of multiple variables, ensuring that Emerson continues to lead in the automation industry.