Manual de Instrucciones | Modelo CHN201 |
Operating Instructions | Model CHN201 |
Cómo usar la
Clavadora (Continuación)
8. | Cierre el pestillo |
|
| empujándolo hacia |
|
| adentro hasta que |
|
| ajuste en su posición. | movemiento |
Servicio Técnico |
| |
Si desea hacer alguna pregunta refer- ente a la reparación u operación de las clavadoras, o para solicitar copias adi- cionales de este manual, sírvase llamar a nuestro número especial,
de las herramientas, la seguridad y la duración pueden disminuir si no se utilizan los clavos adecuados. Cuando ordene partes de repuesto o clavos, especifique el número de la parte.
Para reparar la clavadora
La herramienta deberá ser reparada únicamente por personal calificado, y deberán usar piezas de repuesto y accesorios originales Campbell Hausfeld, o piezas y accesorios que funcionen de manera equivalente.
Para colocarle los sellos
larlos. Igualmente, deberá ponerle un poco de aceite a todas las piezas que se mueven y muñones. Finalmente, después de haberla ensamblado y antes de probar la herramienta deberá pon- erle unas cuantas gotas de aceite sin detergente 30W u otro aceite similar, en las líneas de aire.
General Safety Information (Continued)
●Always assume the nailer contains nails. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of nails. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the nailer could result in death or serious per- sonal injury.
●Do not drive a
nail on top of other nails. The
approval from Campbell Hausfeld. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or tool
damage may occur.
● Avoid long extended periods of |
work with the nailer. Stop using the |
nailer if you feel pain in hands or |
arms. |
● Always check that the Work Contact |
Element (WCE) |
is operating |
properly. A nail |
could acciden- |
tally be driven |
Standard
Operating The Nailer
LUBRICATION
This nailer requires lubrication before using the nailer for the first time and before each use. If an inline oiler is used, manual lubrication through the air inlet is not required on a daily basis.
NOTICE | The work surface |
Clavos y Refacciones
!ADVERTENCIA
Use solamente clavos Campbell Hausfeld originales calibre 16 (o su equivalente) - (vea la información sobre intercambio de clavos). El desempeño
Cada vez que repare una clavadora deberá limpiarle y lubricarle las partes internas. Le recomendamos que use Parker
nail could glance and cause death or a serious punc- ture wound.
●Do not operate
or allow anyone
else to operate the nailer if any warnings or warning labels
are not legible. Warnings or warning labels are located on the nailer maga- zine and body.
if the WCE is |
not working |
properly. |
Personal injury
may occur (See "Checking the Work Contact Element" Section).
●Disconnect air supply and release tension from the pusher before attempting to clear jams because fasteners can be ejected from the front of the nailer. Personal injury may occur.
Notice indicates |
can become dam- |
aged by excessive lubrication. Proper lubrication is the owner’s responsibili- ty. Failure to lubricate the nailer prop- erly will dramatically shorten the life of the nailer and void your warranty.
1.Disconnect the air supply from
the nailer to add lubricant.
Clavos
Estos clavos para acabado de Campbell Hausfeld los puede comprar en su tienda más cercana. Si necesita ayuda para encon- trar un artículo, comuníquese al
Modelo # | Longitud | Calibre | Acabado | Cabeza | Unión | Clavos por | Clavos por | |
del cuerpo | línea | Caja | ||||||
|
|
|
|
| ||||
FB003060 | 3,18cm (11⁄4”) | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 2500 | |
FB004060 | 3,81cm (11⁄2”) | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 2500 | |
FB004560 | 4,45cm (13⁄4”) | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 2500 | |
FB005060 | 5,08cm (2”) | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 2500 | |
FB006560 | 6,35 cm | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 2500 | |
FB160025 | 1" | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 1000 | |
FB160040 | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 1000 | ||
FB160050 | 2" | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 1000 | |
FB160065 | 16 | Galvanizado | De puntilla | Adhesivo | 50 | 1000 |
●Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, exam- ine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.
Caution indicates ! CAUTION a potentially haz-
ardous situation which, if not avoided, MAY result in minor or moderate injury.
●Do not make any modifications to the tool without first obtaining written
NOTICE important infor- |
mation, that if not followed, MAY cause damage to equipment.
●Avoid using the nailer when the magazine is empty. Accelerated wear on the nailer may occur.
●Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced.
●Air compressors providing air to the nailer should follow the require- ments established by the American National Standards Institute
2. Turn the nailer | OIL | |
so the air inlet | ||
| ||
is facing up. |
| |
Place |
| |
of 30 W non- |
| |
detergent oil into air inlet. Do not | ||
use detergent oils, oil additives, or | ||
air tool oils. Air tool oils contain sol- | ||
vents which will damage the nailer's | ||
internal components. | ||
3. After adding oil, run nailer briefly. Wipe off any excess oil from the cap exhaust.
Información de intercambio
Los clavos usados con la clavadora para acabado CHN201 de Campbell Hausfeld también se pueden usar con las clavadoras Hitachi NT65A, Paslode
Recommended Hookup |
|
| Regulator | |
Quick | Quick | Quick Plug | ||
| ||||
(Optional) | Oiler | |||
Plug | Coupler | |||
|
| Quick |
| |
|
| Coupler |
| |
|
| (Optional) |
| |
|
| Air |
| |
|
| Hose |
| |
|
|
| Filter | |
|
|
| www.chpower.com | |
|
| 3 |
|