Lower Light Kit Assembly

1.With the fan assembly safely installed on the mounting bracket, install the lower light kit as follows.

2.Remove one screw (retain for future use) and loosen the two other screws in the motor housing for installation of the light kit assembly (Figure 11).

3.Connect the white wire from the ceiling fan assembly to the white wire of the light kit assembly (Figure 11). Connect the black wire from the ceiling fan assembly to the black wire of the light kit assembly.

! WARNING

Make sure all wires and connectors are tucked under the light kit assembly and not pinched between light kit assembly and fan motor assembly.

4Position the light kit assembly onto the fan motor assembly, safely tucking all wires and connectors inside the light kit assembly.

5. Engage the two key slots on the light kit assembly

with two loosened screws in motor housing

assembly. Rotate the light kit assembly clockwise

MOTOR HOUSING

BLACK WIRE

MOTOR

HOUSING

WHITE WIRE

REMOVE & RETAIN

ONE SCREW FROM

MOTOR HOUSING

LIGHT KIT WHITE WIRE

LIGHT KIT BLACK WIRE

LIGHT KIT ASSEMBLY

Figure 11

MOTOR HOUSING

ASSEMBLY

LOOSEN TWO SCREWS

WIRE CONNECTORS

to engage the two screws into both slots and

tighten securely. Install the previously removed

screw into the remaining hole of the light kit

assembly, attaching it to the fan motor assembly

securely (Figure 12).

6. If no light kit is to be used, screw the light kit

cover plate into the center hole of the light kit

assembly. Rotate the light kit cover plate

clockwise until fully installed (Figure 13).

CAUTION: To avoid risk of burns or other injury, assure power is off before attempting to install or replace the 50-watt (max.) mini-candelabra base halogen lamps. Halogen lamps are very hot and can cause burns. Allow the lamps to cool sufficiently before handling.

CAUTION: To not touch 50-watt (max.) mini- candelabra base halogen lamps with bare hands. Fingerprints may result in shorter lamp life. Remove fingerprints with alcohol.

7.If light kit assembly is to be used as a down light, screw in two 50-watt (maximum) mini- candelabra base halogen lamps (supplied) into the light kit assembly light sockets (Figure 14).

8.Place the light kit glass shade into the light kit assembly, aligning the three flat areas on the top flange of the glass shade with the three raised studs in the light kit assembly. Then turn the glass shade clockwise until it stops and is secure (Figure 14).

NOTE: Periodically check that the glass bowl is seated fully clockwise in the light kit assembly.

9.Installation of your ceiling fan is now complete. Proceed with installation of the wall control.

Please call Emerson technical support at 1-800-654-3545 if you have any questions about installation and operation of this ceiling fan.

MOTOR

HOUSING

ASSEMBLY

LIGHT KIT

ASSEMBLY

REINSTALL SCREW

Figure 12

LIGHT KIT

ASSEMBLY

CENTER HOLE

LIGHT KIT

ASSEMBLY

LIGHT KIT

COVER PLATE

Figure 13

LIGHT KIT	50-WATT BASE
LIGHT KIT	LAMPS (2)
SOCKETS (2)	LIGHT KIT
	ASSEMBLY
	RAISED
	STUDS (3)
	GLASS SHADE
	FLAT AREAS (3)
	LIGHT KIT
	GLASS SHADE
Figure 14

8	ETL Model No.: CF550

CF550BS00, CF550ORB00 specifications

The Emerson CF550BS00 and CF550ORB00 ceiling fans are two impressive models designed for both style and efficient airflow. These fans combine aesthetics with advanced technology, making them suitable for any room setting, whether modern or traditionally styled.

One of the standout features of the Emerson CF550 fans is their powerful energy-efficient motor. This motor ensures high airflow while consuming minimal energy, making the ceiling fans ideal for those looking to reduce energy costs. The fans operate at various speeds, allowing users to customize airflow according to their comfort needs. With a maximum airflow of over 5,000 CFM, these fans can effectively circulate air in larger spaces.

Both models sport a sleek design, available in brushed steel (CF550BS00) and oil-rubbed bronze (CF550ORB00) finishes. This versatility allows homeowners to choose a model that complements their interior decor. The fans are equipped with five high-quality blades, engineered for optimal performance. These blades are not only aesthetically pleasing but also designed to generate powerful airflow while minimizing noise, ensuring a peaceful environment.

The Emerson CF550 fans feature a dual-mount installation system, allowing for both standard and angled mounting. This flexibility enables installation in various ceiling heights and styles, accommodating a range of room layouts. Additionally, the fans come with a remote control option, providing convenient accessibility for adjusting settings from anywhere in the room.

In terms of user comfort, these fans are equipped with a reverse motor function, allowing users to change the direction of the blades. This feature becomes particularly useful in different seasons; during warmer months, the fans provide a cooling effect, while in winter, the reverse function helps circulate heated air, enhancing energy efficiency and comfort.

Durability is another hallmark of the Emerson CF550 series. Constructed with high-quality materials, these fans are designed to withstand the test of time. The blades are treated against warping and fading, ensuring they retain their beauty and functionality for years.

In summary, the Emerson CF550BS00 and CF550ORB00 ceiling fans offer an exceptional combination of style, energy efficiency, and innovative technology. With their robust performance, aesthetic appeal, and versatile features, these fans provide a perfect solution for comfortable climate control in any living space. Whether enhancing a cozy bedroom or a spacious living area, these ceiling fans are an excellent investment for modern and classic homes alike.