Switch CUP Cover | Emerson CF4801AP00, CF4801GBZ00, CF4501GBZ00

How to Put Your Ceiling Fan Together (continued)

11.Use four #10-24 x 12mm pan head screws and flat washers (supplied) to secure flange to blade (Figure 6). Repeat for the remaining four blades. Illustration may not show the exact flange you are installing.

12.Use the 10 round recessed holes in the motor hub marked with "5" and install the five blade assemblies (ordered separately) in accordance with Step 13.

13.Attach one blade assembly to the motor hub using two 10-32 x 5/8" oval head screws (supplied) (Figure 7). Do not tighten completely at this time. Install remaining blade assemblies in the same way. Gently snug all flange screws to the motor hub, working around the hub in a clockwise sequence. Next, securely tighten all flange screws, again working in a clockwise sequence. Failure to follow this procedure could result in fan wobble. This completes the blade installation.

NOTE: Take care not to scratch fan housing when installing blades.

14.Position the switch cup cover onto the switch cup, aligning the two holes. Use the two 8-32 x 3/8” pan head screws to secure cover (Figure 8).

NOTE: Make sure wires are not pinched between switch cup and switch cup cover.

#10-24 x 12mm PAN HEAD BLADE SCREW (4)

FLAT WASHER (4)

FAN BLADE (Sold Separately)

BLADE

FLANGE

Figure 6

10-32 x 5/8" OVAL HEAD SCREWS (2 PER BLADE ASSEMBLY)

Figure 7

#8 - 32 x3/8" PAN HEAD SCREW (2)

SWITCH CUP

COVER

SWITCH CUP

Figure 8

6	U.L. Model No.: CF4801 and CF4501