RIDGID GP90135 manual Operating Your Air Compressor Maintenance, To Start Gasoline Engine

Page 7

Operating Your Air Compressor (continued)

Maintenance

To Start Gasoline Engine

!WARNING

!DANGER

5. Move the choke lever to the CHOKE

position, turn the fuel lever ON, and

turn the engine stop switch to the ON

position.

6. Pull start grip lightly until resistance is

felt, and then pull briskly.

Release all pressure from the system before attempting to install, service, relocate or per- form any maintenance.

Do not attempt to tamper with the ASME safety valve!

7. As the engine warms up, gradually

move the choke lever to the open posi-

tion. See gas engine manual for more

details.

8. Run the compressor unloaded for

approximately 30 minutes to break in

the pump.

9. After approximately 30 minutes, move

the unloader lever down to the loaded

position and turn the regulator knob

clockwise (See Figures 7 and 8). The

compressor will begin to pump air into the tank.

When maximum tank pressure is reached, the compressor automatically unloads, bringing the engine to idle. The engine remains at idle until tank pressure falls to a preset level. The engine then accelerates and the compressor pumps additional air into the tank.

Figure 7 - Manual Lever Loaded Position

Open Close

Figure 8 -Regulator Knob

In order to maintain efficient operation of the compressor system, check the air fil- ter weekly (per maintenance schedule), oil level and gasoline level before each use. The ASME safety valve should also be checked weekly. Pull ring on safety valve and allow the ring to snap back to normal position. This valve automatically releases air if the tank pressure exceeds the preset maximum. If air leaks after the

ring has been released, or the valve is

Figure 9

 

stuck and cannot be actuated by the ring,

 

the ASME safety valve MUST be

 

replaced.

 

With engine OFF, clean debris from engine, flywheel, tank, air lines and pump cooling fins.

Maintenance Schedule

 

Operation

Daily Weekly Monthly 3 Months

 

 

Check Oil Level

 

 

Drain Tank

 

 

Check Air Filter

 

 

Check Safety Valve

 

 

Blow Dirt From Unit

 

 

Check Belt Tightness

 

 

Change Oil

 

 

 

 

 

12

13

Image 7
Contents Wheelbarrow AIR Compressor Safety Instructions Table of ContentsBreathable Air Warning Spraying PrecautionsGlossary of Terms Getting to Know Your Air Compressor Unpacking and Checking ContentsMoisture in Compressed Air Operating Your Air CompressorLubrication Start-UpMaintenance Schedule Operating Your Air Compressor MaintenanceTo Start Gasoline Engine Storage Filter Removal, Inspection and ReplacementTank Drive BeltNew one each time TroubleshootingBe sure that the old head Gasket is replaced with aTroubleshooting For Repair Parts, Call 1-800-4-RIDGID Repair PartsPage Catalog No. ### Model No. GP90135 Serial No RIDGID, INC

GP90135 specifications

The RIDGID GP90135 is a remarkable piece of equipment, designed to meet the rigors of both professional and DIY projects. Its innovative design and robust functionality make it an indispensable tool for plumbers, contractors, and home improvement enthusiasts alike.

One of the standout features of the GP90135 is its powerful performance. With a high-efficiency motor, this tool delivers robust torque and consistent power, ensuring that it can tackle even the toughest tasks with ease. This is particularly important when dealing with a variety of materials, as it allows for a smoother and more efficient workflow.

Another notable characteristic of the GP90135 is its advanced ergonomic design. RIDGID has prioritized user comfort, which is evident in the tool's lightweight construction and well-placed handles. These features reduce operator fatigue during extended use, making it more manageable for users to carry out demanding projects without discomfort.

The GP90135 also incorporates advanced technologies to enhance usability. Its built-in LED indicators provide real-time information on operation status, allowing users to manage their work effectively. This feature is invaluable when operating in low-light conditions or tight spaces where visibility is often compromised.

In terms of versatility, the RIDGID GP90135 is equipped with adjustable speed settings, enabling users to tailor the tool’s performance to specific tasks. Whether it’s drilling through tougher materials or making precision cuts, this tool provides the flexibility needed to achieve the best results.

Durability is another key characteristic of the GP90135. Constructed from high-quality materials, it is designed to withstand the wear and tear of daily use in demanding environments. This reliability not only extends the life of the tool but also ensures that it consistently performs at a high level.

Maintenance is simplified with the GP90135 as well. Its user-friendly design allows for easy access to essential components, ensuring that users can keep the tool in top condition with minimal effort.

Overall, the RIDGID GP90135 combines power, versatility, and ease of use. Its advanced features and technologies cater to the needs of a wide range of users, making it a valuable addition to any toolkit. Whether for professional applications or home improvement tasks, the GP90135 stands out as a reliable and effective solution.