RIDGID R7130 manual Operation, Applications, Setting the Position of the Bail Handle

Page 11

OPERATION

WARNING:

Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this tool for the purposes listed below:

nDrilling in wood

nDrilling in both hard and soft metals

SETTING THE POSITION OF THE BAIL HANDLE

See Figure 5.

The bail handle may be adjusted to three positions, depend- ing on the application and the angle that will give you most control and best access to the workpiece.

To set the position of the bail handle:

nUsing a 14 mm wrench, loosen the hex head screw on each side of the tool by turning counterclockwise. It is not necessary to remove the screws.

nAdjust the handle forward or back until the desired posi- tion is reached.

nTighten the screw on each side by turning the wrench clockwise. Do not overtighten.

BAIL HANDLE

HEX HEAD

SCREW

WRENCH

Fig. 5

11

Image 11
Contents Double Insulated OPERATOR’S ManualIntroduction Table of ContentsPersonal Safety General Safety RulesWork Area Safety Electrical SafetyService Specific Safety RulesSymbolname SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionProduct Specifications FeaturesAssembly See Figures 3 Installing the Pipe HandleInstalling Bits Removing BitsApplications Setting the Position of the Bail HandleOperation Clutch Switch TriggerBIT Binding BIT SelectionSee Figures 9 DrillingLubrication MaintenanceGeneral Maintenance Brush ReplacementSee Figures 13 Chuck RemovalTo Retighten a Loose Chuck HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information

R7130 specifications

The RIDGID R7130 is a powerful and versatile electric nail gun that has gained popularity among both professionals and DIY enthusiasts. Designed for efficiency and precision, this tool is an indispensable addition to any toolbox. One of the standout features of the R7130 is its impressive driving power, which enables it to easily penetrate a variety of materials, including hardwoods and engineered woods, making it suitable for a range of applications such as framing, decking, and general construction.

The R7130 is equipped with advanced technologies that enhance its performance and usability. Its unique motor design provides consistent power, ensuring that each nail is driven flush with the work surface. This reliability reduces the likelihood of misfires and ensures a clean, professional finish. Furthermore, the tool features a depth adjustment dial, allowing users to customize the depth of nail penetration according to the specific requirements of their project. This feature not only improves the tool’s versatility but also helps protect the workpiece from damage.

Another notable characteristic of the RIDGID R7130 is its lightweight design, which makes it easy to maneuver and reduces user fatigue during extended use. The ergonomic handle is designed to provide a comfortable grip, ensuring that users can work for longer periods without discomfort. Additionally, the tool comes with a built-in LED light that illuminates the work area, providing enhanced visibility in dimly lit spaces.

The R7130 also incorporates tool-free jam release and depth adjustment features, simplifying maintenance and minimizing downtime. This tool is designed for quick and easy nail loading, allowing users to focus on their projects rather than spending time dealing with equipment issues.

In summary, the RIDGID R7130 electric nail gun combines power, precision, and user-friendly features, making it ideal for a wide range of applications. With its reliable performance, lightweight design, and advanced technologies, it is a top choice for professionals and hobbyists alike, providing the capability to tackle even the most challenging projects with confidence and ease. Whether you're building frames, installing trim, or engaging in home repair tasks, the R7130 stands out as a critical tool for achieving quality results.