RIDGID R7130 manual Customer Service Information

Page 18

OPERATOR’S MANUAL

1/2 in. RIGHT ANGLE DRILL

DOUBLE INSULATED

R7130

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.	R7130

Serial No.

983000-649
2-05	18

Image 18

Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionElectrical Safety General Safety RulesWork Area Safety Personal SafetySpecific Safety Rules ServiceSymbols SymbolnameSymbol Signal Meaning Electrical Connection ElectricalDouble Insulation Extension CordsFeatures Product SpecificationsAssembly Removing Bits Installing the Pipe HandleInstalling Bits See Figures 3Setting the Position of the Bail Handle OperationApplications Switch Trigger ClutchBIT Selection BIT BindingDrilling See Figures 9 Brush Replacement Maintenance General Maintenance LubricationChuck Removal To Retighten a Loose ChuckSee Figures 13 What is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredCustomer Service Information