RIDGID R841150 manual Important Safety Instructions for Charger

Page 5

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

■Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed this warning can result in serious personal injury.

■Save these instructions. This manual contains im- portant safety and operating instructions for charger.

■Before using battery charger, read all instructions

and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■CAUTION: To reduce risk of injury, charge only nickel-cadmium type rechargeable batteries. Other

types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not expose charger to wet or damp conditions.

Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Use of an attachment not recommended or sold by

the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■To reduce risk of damage to charger body and cord,

pull by charger plug rather than cord when discon- necting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury.

■Do not abuse cord. Never carry tool by cord or yank

it to disconnect from receptacle. Keep cord from heat, oil and sharp edges. Following this rule will reduce the risk of electric shock or fire.

■An extension cord should not be used unless abso- lutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is properly wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet)

25'

50'

100'

Cord Size (AWG)

16

16

16

Note: AWG = American Wire Gage

■Do not operate charger with a damaged cord or plug.

If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not operate charger if it has received a sharp blow,

been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incor-

rect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or

cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If

you loan someone this tool, loan them these instruc- tions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

WARNING:

Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equip- ment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual Introduction Table of ContentsModel Battery Pack Charger General Safety RulesService Specific Safety RulesImportant Safety Instructions for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsFeatures Depth Gage ROD Battery Pack Dual Port ChargerPacking List UnpackingInstructions Operation Full Indicator Power Indicator EvaluateLED Function of Charger OFFTo Remove Battery Pack To Install Battery PackApplications Variable SpeedTWO-SPEED Gear Train ReversibleUnlock Release Lock Tighten Installing BitsRemoving Bits Adjustable Torque Clutch Installing Depth Gage RODTo Adjust Torque To Increase TorqueDrilling Wood Drilling To Adjust Drilling or Hammer ModeMetal Drilling Masonry DrillingChuck Removal MaintenanceGeneral To Retighten a Loose Chuck Battery Pack Removal Preparation for RecyclingBatteries CYCDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the Limited Three Year Warranty HOW to Obtain Service What is not CoveredPage Volt Mm Hammer Drill R841150 Two Speed/Reversible

R841150 specifications

The RIDGID R841150 is a powerful and versatile 18V cordless hybrid fan, designed to deliver exceptional airflow and functionality for both professional and DIY users. With its robust construction and innovative features, the R841150 stands out in the crowded market of cordless tools, making it a must-have for any toolkit.

One of the most notable features of the R841150 is its hybrid capability, which allows the fan to operate using either a RIDGID 18V battery or a standard AC power outlet. This flexibility ensures that users can rely on the fan in various situations, whether working on a job site without access to electricity or needing a steady airflow indoors.

The fan boasts a powerful motor that produces impressive airflow, making it suitable for cooling, ventilation, and drying applications. With multiple speed settings, users can easily adjust the airflow to meet their specific needs, ensuring comfort and efficiency. This versatility makes the R841150 ideal for a range of environments, including construction sites, workshops, and outdoor events.

Portability is a key characteristic of the RIDGID R841150. Weighing in at just under eight pounds, the fan is lightweight and equipped with a built-in handle, allowing for easy transportation from one location to another. Additionally, the fan features a 360-degree rotating head, enabling users to direct airflow precisely where it's needed, enhancing its usability in tight or awkward spaces.

Durability is another cornerstone of the RIDGID brand, and the R841150 is no exception. Constructed from high-quality materials, this fan is designed to withstand the rigors of daily use. Its robust housing protects internal components from damage, ensuring longevity even in demanding conditions.

The integrated LED light is a thoughtful addition, providing illumination in low-light situations. This feature enhances the fan’s overall functionality, making it a valuable tool not just for ventilation but also for lighting spaces during evenings or in dark corners.

In summary, the RIDGID R841150 hybrid fan combines versatility, portability, and durability, making it an essential tool for various applications. Its powerful motor, adjustable speed settings, and 360-degree rotation, along with hybrid operation, make it an excellent choice for both professionals and DIY enthusiasts looking to enhance their work experience.
Top Page Image Contents