SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
V | Volts | Voltage |
A | Amperes | Current |
Hz | Hertz | Frequency (cycles per second) |
W | Watt | Power |
min | Minutes | Time |
| Alternating Current | Type of current |
| Direct Current | Type or a characteristic of current |
no | No Load Speed | Rotational speed, at no load |
| Class II Construction | |
.../min | Per Minute | Revolutions, strokes, surface speed, orbits etc., per minute |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Read The Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
| Eye Protection | Always wear safety goggles or safety glasses with side shields |
| and a full face shield when operating this product. | |
|
| |
| Safety Alert | Precautions that involve your safety. |
| No Hands Symbol | Failure to keep your hands away from the blade will result in |
| serious personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in |
| serious personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in |
| serious personal injury. | |
|
| |
| No Hands Symbol | Failure to keep your hands away from the blade will result in se- |
| rious personal injury. | |
|
| |
| Hot Surface | To reduce the risk of injury or damage, avoid contact with |
| any hot surface. | |
|
|
6