Keeping the Charger Vents Clean, General, Batteries

MAINTENANCE

KEEPING THE CHARGER VENTS CLEAN

The fan in this charger will perform more efficiently if the air vents and ports are kept clean and dust-free. Periodically check the air vents for dust or other debris.

To clean the vents, unplug the charger. Using a fine nylon- bristle brush, whisk dust or debris away from the air vents and ports.

The battery pack has intake and exhaust vents that should also be kept free of dust and debris. Clean the battery pack vents by using a fine nylon-bristle brush to whisk away dust or debris.

When cleaning, do not allow metal to come into contact with any of the vents or ports of the charger or battery pack.

WARNING:

When servicing use only identical RIDGID® replacement parts. Use of any other parts may create a hazard or cause product damage.

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

GENERAL

Use clean cloths to remove dirt, carbon dust, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when using compressed air to clean tools. If the operation is dusty, also wear a dust mask.

BATTERIES

The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

RIDGID slide batteries have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

nStore and charge your batteries in a cool area. Temperatures below 50°F or above 100°F will shorten battery life.

nNever store batteries in a discharged condition. Recharge them immediately after they are discharged.

nAll batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

WARNING:

Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel-cadmium

batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

R82015 specifications

The RIDGID R82015 is a cordless drill/driver that stands out in the comprehensive line of power tools designed for both professionals and DIY enthusiasts. Known for its durability and performance, the R82015 embodies RIDGID’s commitment to delivering high-quality tools equipped with advanced features.

One of the key highlights of the RIDGID R82015 is its powerful motor, capable of delivering an impressive 2,000 RPM on high speed and 0-450 RPM on low speed. This variable speed feature allows users to tackle a wide range of applications, from delicate tasks to heavy-duty jobs, with ease and precision. The drill is equipped with a two-speed transmission that optimizes performance based on the specific requirements of the task at hand.

An integral part of the R82015’s design is its 1/2-inch keyless chuck, which allows for quick bit changes without the need for additional tools. This feature enhances user convenience, saving valuable time during projects. The drill’s high torque output of up to 400 inch-pounds ensures that it can handle tough fastening and drilling applications effortlessly.

Another significant advantage of the RIDGID R82015 is its heavy-duty construction, designed to withstand the rigors of job site conditions. The ergonomic handle is molded for comfort and includes a rubber overmold for a secure grip, reducing fatigue during prolonged use. This design consideration ensures that users can work efficiently without sacrificing comfort.

Additionally, the RIDGID R82015 incorporates Smart Technology, which adds to its versatility. This intuitive technology optimizes battery management and ensures consistent power output. Compatible with RIDGID's 18V battery system, it allows users to interchange batteries with other tools in the RIDGID lineup, enhancing overall productivity.

The built-in LED light is another commendable feature, illuminating dark workspaces and providing users with enhanced visibility during drilling tasks. This added convenience often proves invaluable when working in tight or dimly lit areas.

In summary, the RIDGID R82015 combines power, versatility, and durability, making it an outstanding choice for professionals and hobbyists alike. Its robust motor, user-friendly features, and advanced technologies position it as a reliable tool that can be relied upon for a myriad of tasks, from simple home repairs to complex construction projects. With RIDGID’s reputation for quality, the R82015 is a tool that ensures efficient and effective performance, solidifying its place in any toolkit.