RIDGID R86006 manual Drill BIT

Page 11

OPERATION

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

See Figure 3.

The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward drilling. The drilling direction is reversed when the selector is to the right of the switch trigger.

Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

CAUTION:

To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation.

To stop the drill, release the switch trigger and allow the chuck to come to a complete stop.

NOTE: The drill will not run unless the direction of rotation selector is pushed fully to the left or right.

Avoid running the drill at low speeds for extended periods of time. Running at low speeds under constant usage may cause the drill to become overheated. If this occurs, cool the drill by running it without a load and at full speed.

KEYLESS CHUCK

See Figure 4.

The drill has a keyless chuck to tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit.

WARNING:

Do not hold the chuck body with one hand and use the power of the drill to tighten the chuck jaws on the drill bit. The chuck body could slip in your hand, or your hand could slip and come in contact with the rotating drill bit. This could cause an accident resulting in serious personal injury.

 

UNLOCK

KEYLESS

DRILL BIT

(RELEASE)

 

CHUCK

CHUCK

JAWS

LOCK

(TIGHTEN)

CHUCK

BODY

Fig. 4

11

Image 11
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesAssembly Applications Battery Protection FeaturesOperation Switch Trigger To Install Battery PackTo Remove Battery Pack Drill BIT Two-SPEED gear train Removing Bits Installing BitsMetal DRILLING DrillingWood DRILLING Batteries MaintenanceGeneral Maintenance Battery Pack Removal and Preparation for RecyclingTo Retighten a Loose Chuck Chuck RemovalHOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information

R86006 specifications

The RIDGID R86006 is a powerful 18V cordless brushless impact driver designed to meet the rigorous demands of both professional contractors and DIY enthusiasts. Known for its robust construction and advanced capabilities, this tool stands out in its category, offering a blend of performance, versatility, and durability.

The first notable feature of the R86006 is its brushless motor, which provides enhanced efficiency compared to traditional brushed motors. This technology not only extends battery life but also reduces wear and tear, improving the overall lifespan of the tool. With an impressive torque rating, the R86006 can handle a variety of fastening applications, allowing users to complete tasks efficiently.

Equipped with a variable speed trigger, this impact driver allows for precise control over speed and power. Users can easily adjust the performance to suit different materials and applications, making it a versatile choice for tasks ranging from driving screws into wood to fastening bolts in metal surfaces. The integrated LED work light adds to its practicality, illuminating dark work areas and enhancing visibility for increased productivity.

The R86006 features a 1/4-inch quick change hex chuck, enabling rapid and tool-free bit changes. This convenience is ideal for professionals on the go, allowing them to switch bits quickly without the need for additional tools.

Another key characteristic of the RIDGID R86006 is its ergonomic design. The tool is lightweight and features a comfortable grip, reducing fatigue during extended use. This thoughtful design promotes user comfort while maintaining control, ensuring accuracy and efficiency in every task.

Moreover, the R86006 is part of RIDGID's 18V platform, meaning it is compatible with the entire line of RIDGID 18V batteries and chargers. This compatibility provides users with the flexibility to switch batteries across tools, reducing downtime and maximizing productivity.

In summary, the RIDGID R86006 is a feature-packed impact driver that combines advanced brushless technology, user-friendly design, and impressive performance. Whether tackling heavy-duty applications or simple projects at home, this tool proves to be an invaluable addition to any toolkit. Its reliability, efficiency, and ergonomic characteristics make it a top choice for those demanding peak performance in their power tools.