RIDGID R86006 manual Installing Bits, Removing Bits

Page 13

OPERATION

BIT STORAGE

See Figure 8.

When not in use, bits provided with the drill can be placed in the storage area located on the base of the drill.

INSTALLING BITS

See Figure 9.

Lock the switch trigger by placing the direction of rotation selector in the center position.

Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws.

Insert the drill bit.

WARNING:

Make sure to insert the drill bit straight into the chuck jaws. Do not insert the drill bit into the chuck jaws at an angle then tighten, as shown in figure 10. This could cause the drill bit to be thrown from the drill, resulting in possible serious personal injury or damage to the chuck.

Tighten the chuck jaws securely on the bit.

Note:  Rotate the chuck body in the direction of the arrow marked CLOSE to close the chuck jaws. Do not use a wrench to tighten or loosen the chuck jaws.

REMOVING BITS

See Figure 9.

Lock the switch trigger by placing the direction of rotation selector in the center position.

Open the chuck jaws.

Note: Rotate the chuck body in the direction of the arrow marked OPEN to open the chuck jaws. Do not use a wrench to tighten or loosen the chuck jaws.

Remove the drill bit.

BIT STORAGE

AREA

Fig. 8

 

UNLOCK

 

DRILL BIT

(RELEASE)

KEYLESS

 

 

CHUCK

CHUCK

JAWS

LOCK

(TIGHTEN) CHUCK BODY

RIGHTFig.9

WRONG

Fig. 10

13

Image 13
Contents OPERATOR’S Manual Introduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesAssembly Operation Battery Protection FeaturesApplications To Remove Battery Pack To Install Battery PackSwitch Trigger Drill BIT Two-SPEED gear train Removing Bits Installing BitsWood DRILLING DrillingMetal DRILLING General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesTo Retighten a Loose Chuck Chuck RemovalDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information

R86006 specifications

The RIDGID R86006 is a powerful 18V cordless brushless impact driver designed to meet the rigorous demands of both professional contractors and DIY enthusiasts. Known for its robust construction and advanced capabilities, this tool stands out in its category, offering a blend of performance, versatility, and durability.

The first notable feature of the R86006 is its brushless motor, which provides enhanced efficiency compared to traditional brushed motors. This technology not only extends battery life but also reduces wear and tear, improving the overall lifespan of the tool. With an impressive torque rating, the R86006 can handle a variety of fastening applications, allowing users to complete tasks efficiently.

Equipped with a variable speed trigger, this impact driver allows for precise control over speed and power. Users can easily adjust the performance to suit different materials and applications, making it a versatile choice for tasks ranging from driving screws into wood to fastening bolts in metal surfaces. The integrated LED work light adds to its practicality, illuminating dark work areas and enhancing visibility for increased productivity.

The R86006 features a 1/4-inch quick change hex chuck, enabling rapid and tool-free bit changes. This convenience is ideal for professionals on the go, allowing them to switch bits quickly without the need for additional tools.

Another key characteristic of the RIDGID R86006 is its ergonomic design. The tool is lightweight and features a comfortable grip, reducing fatigue during extended use. This thoughtful design promotes user comfort while maintaining control, ensuring accuracy and efficiency in every task.

Moreover, the R86006 is part of RIDGID's 18V platform, meaning it is compatible with the entire line of RIDGID 18V batteries and chargers. This compatibility provides users with the flexibility to switch batteries across tools, reducing downtime and maximizing productivity.

In summary, the RIDGID R86006 is a feature-packed impact driver that combines advanced brushless technology, user-friendly design, and impressive performance. Whether tackling heavy-duty applications or simple projects at home, this tool proves to be an invaluable addition to any toolkit. Its reliability, efficiency, and ergonomic characteristics make it a top choice for those demanding peak performance in their power tools.