RIDGID R7111 manual Accessories, To Retighten a Loose Chuck

Page 14

MAINTENANCE

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, caus- ing the chuck jaws to bind and prevent them from closing. To tighten:

Unplug the drill.

Open the chuck jaws.

Insert the hex key into the chuck and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.

NOTE: The chuck screw has left hand threads.

ACCESSORIES

Look for these accessories where you purchased this product:

 

�High Speed Bits (For wood or metal)

1/2 in.

�Wood Boring Bits

1-1/4 in.

�Hole Saws

2-1/2 in.

WARNING:

Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionElectrical Safety General Safety RulesWork Area Safety Personal SafetySpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Electrical Connection ElectricalDouble Insulation Extension CordsFeatures Assembly OperationTo Install Bits To Remove Bits Using the Auxiliary Handle Assembly To adjust the auxiliary handle assemblyMetal Drilling DrillingWood Drilling Lubrication MaintenanceGeneral Maintenance Chuck RemovalAccessories To Retighten a Loose ChuckWhat is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredCustomer Service Information
Top Page Image Contents