RIDGID R7111 manual Symbol Signal Meaning

Page 6

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

 

 

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

 

in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

 

in death or serious injury.

 

 

 

 

 

 

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in

 

minor or moderate injury.

 

 

 

 

 

 

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in property

 

damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call RIDGID customer service for assistance.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

6

Image 6
Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionElectrical Safety General Safety RulesWork Area Safety Personal SafetySpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Electrical Connection ElectricalDouble Insulation Extension CordsFeatures Assembly OperationTo Install Bits To Remove BitsUsing the Auxiliary Handle Assembly To adjust the auxiliary handle assemblyDrilling Wood DrillingMetal Drilling Lubrication MaintenanceGeneral Maintenance Chuck RemovalAccessories To Retighten a Loose ChuckWhat is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredCustomer Service Information