Emerson 396VP, 398VP, 397 instruction manual Mounting Accessories optional

Page 11

MODEL 396/396VP/397/398/398VP

SECTION 1.0

 

DESCRIPTION AND SPECIFICATIONS

FOR FIRST TIME 396, 396VP, 398, AND 398VP INSTALLATIONS,

ROSEMOUNT ANALYTICAL RECOMMENDS USING THE FOLLOWING GUIDE:

1.Process Connector Accessories (required for all first time installations with 1-inch process connection threads) Choose one: PN 23166-00, 316 SST, 1 in. x 1 in. NPT process connector, with EPDM o-ring

PN 23166-01, Titanium, 1 in. x 1 in. NPT process connector, with EPDM o-ring PN 9510066, Nylon, 1 in. x 1 in. NPT process connector (submersion only)

Choose one (optional process connector o-rings) PN 9550220, Kalrez o-ring, 2-214 PN 9550099, Viton o-ring, 2-214

2.Variopol Cable (required for all first time installations) of Models 396VP and 398VP

Choose one: PN 23645-06, 15 ft cable with mating VP connector, prepped with BNC on analyzer end

PN 23645-07, 15 ft cable with mating VP connector, prepped without BNC on analyzer end*

3. Mounting Accessories (optional)

Choose one: PN

915240-03

PVC flow through tee, 3/4 in. NPT process connection

PN

915240-04

PVC flow through tee, 1 in. NPT process connection

PN

915240-05

PVC flow through tee, 1 1/2 in. NPT process connection

PN

11275-01 Sensor handrail mounting assembly

PN

2002011 1-1/2 in. CPVC Tee with 1 in. FNPT connection

PN

23728-00 Low Flow Cell, acrylic

4.Remote Junction Boxes (optional, recommended for sensor to analyzer distances of more than 15 ft) Choose one: PN 23555-00 includes preamplifier for Models 54/e, 1055, 81, 3081, 4081

PN 23309-03 and PN 22698-02 plug-in preamplifier for Model 1181Analyzer

PN 23309-04 and PN 22698-03 plug-in preamplifier for Models 1054 series, 2054, 2081 Analyzers PN 23054-03 includes preamplifier for Solu Cube Model 2700

5.Extension cables (used with remote junction boxes)

Choose one: PN 23646-01, 11 conductor, shielded, prepped

PN 9200273, 11 conductor, shielded, unprepped

6. Wiring Aids

Choose one: PN 9120531 BNC splitter, used in place of option -62 or BNC coax prepping for connections to junction box (PN 23555-00); Models 54, 1055, 1054, 81,1181, 2081, 3081, 4081; SoluComp (SCL-P-014);

and Model 2700 Preamplifier (PN 23054-03)

NONE: No wiring aids required for connections to preamplifier PN 22698-02, preamplifier PN 22698-03, or Models 1054A, 1054B, and 2054

*Used for connections to Models 54/e, 1055, 1054, 81, 1181, 2081, 3081, 4081, and remote junction box PN 23555-00.

7

Image 11 Contents
Model PH/ORP SensorsEssential Instructions Hazardous Area InstallationList of Tables Table of ContentsList of Figures Wiring Models 396-54-62, 397-02-54-62, & 398-54-62 to ModelTUpH Features and Applications Section Description and SpecificationsSection Model QUIK-LOC KIT Performance & Physical SpecificationsModel Ordering Information398 10 32 Model Mounting Accessories optional Part Number Description Safety Warning Section Installation2 inch Pipe Tee PN 2002011 with 1 inch threaded connections Dimensional Drawing For Models 396 Section 40039603 C Dimensional Drawings For Model 397 in the Quik-Loc Unit Electrical Installation 40039610 40038920 40039607 40039606 40039608 D 40039605 40039611 Section 21. Wiring Model 396VP and 398VP to 24. Wiring Model 396VP and 398VP to Model 28. Wiring Model 396VP and 398VP to 33. Wiring Model 396VP/398VP to Models 54/54e 36. Wiring Model 396VP-54 to Model 38. Wiring Models 396VP & 398VP to Model Xmt-P-HT-10 39. Wiring Models 396/397/398 to Model 5081-P Sensor Preparation Calibration Using Buffer Solutions or Grab SamplesSection Start UP and Calibration Sensor is in Pressurized System Section MaintenanceTroubleshooting Probable Cause Remedy Section TroubleshootingGeneral Warranty RepairNON-WARRANTY Repair Section Return of MaterialWarranty Specifications subject to change without notice
Related manuals
Manual 40 pages 53.23 Kb