Installing Hanger Bracket | Emerson CF711WW00, CF710PB00, CF710AW00

Installing The

Hanger Bracket

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 4).

MIN.

Figure 4

FLOOR

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support”.

1.Unscrew (but do not remove) the two mounting screws in the outlet box (Figure 5). Position the hanger bracket on the outlet box so that the T-slots in the hanger bracket are aligned with the outlet box screws.

	OUTLET BOX
	LOOSEN TWO
T-SLOT	SCREWS (SUPPLIED
T-SLOT	WITH OUTLET BOX)

SLIDE THE HANGER

BRACKET ONTO

THE OUTLET BOX

SCREWS, THROUGH

THE T-SLOT

HANGER

BRACKET

Figure 5

!WARNING

To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

NOTE: The hanger bracket must be mounted flush with the ceiling in order for the ceiling cover to install properly. If necessary, use leveling washers (not supplied) between the outlet box and the hanger bracket.

2.Slide the hanger bracket onto the outlet box screws. Center the bracket over the outlet box and then securely tighten the screws (Figure 6).

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, use leveling washers between the hanger bracket and the outlet box until the bracket is flush with the ceiling. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

	SECURELY
	TIGHTEN
HOOK	SCREWS
HOOK
	HANGER BRACKET

Figure 6

Hanging The Ceiling Fan

(Standard Method Using

Hanger Ball/Downrod)

1.Carefully lift the fan assembly and seat the hanger ball in the hanger bracket (Figure 7). The tab on the hanger bracket must seat in the groove in the hanger ball.

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

!WARNING

To avoid fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

CF711CK00, CF711BS00, CF711WW00, CF710AW00, CF711AW00 specifications

The Emerson CF710PB00, CF710BS00, CF710WW00, CF711WB00, and CF711AB00 are part of the renowned Emerson ceiling fan series, known for their blend of style, efficiency, and cutting-edge technology. These models cater to a variety of aesthetic preferences and room sizes, making them versatile choices for modern homes and commercial spaces.

One of the standout features across these models is their stunning design. The CF710 series, available in a range of finishes including polished bronze (CF710PB00), brushed steel (CF710BS00), and white (CF710WW00), offers options that fit seamlessly into any interior décor. The CF711 series further expands on this with the walnut blades of the CF711WB00 and the antique brass finish of the CF711AB00, ensuring there’s a fan for every taste.

In terms of performance, these fans are equipped with powerful yet quiet motors that ensure optimal air circulation without the disruptive noise often associated with traditional ceiling fans. The energy-efficient DC motor technology used in these models not only reduces energy consumption but also allows for a wider range of speed settings. This feature affords users precise control over airflow, making it easy to tailor the environment to their preferences.

Another notable characteristic is the ease of installation, which is a hallmark of Emerson fans. Each model comes with comprehensive instructions and mounting hardware, enabling quick and straightforward setup. Additionally, the fans are compatible with various control options, including pull chains, wall switches, and remote controls, enhancing their user-friendliness.

Moreover, these fans exhibit durability and longevity thanks to their high-quality materials and construction. The blades are designed to withstand the test of time while providing a stylish aesthetic. Some models feature energy-saving LED lighting, providing both illumination and ambience in any room.

In summary, the Emerson CF710PB00, CF710BS00, CF710WW00, CF711WB00, and CF711AB00 ceiling fans are ideal for those seeking efficient cooling solutions paired with stylish designs. With their combination of performance, aesthetic versatility, and user-friendly technology, these models reflect Emerson's commitment to quality and innovation in home comfort. They stand out not just as functional devices but as integral elements that enhance the overall home experience.