Installing The Fan Blades

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 9). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 9). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

INSTALL SCREW AND WASHER TIGHTEN SCREW

LOOSEN THIS

SCREW

WIRE CONNECTOR

BLACK

SUPPLY (HOT)

BLUE

FAN WIRE

BLACK

FAN WIRE

WHITE SUPPLY

NEUTRAL)

WHITE FAN WIRE

Figure 9

SUPPLY

GROUND WIRE

GREEN GROUND

WIRE FROM HANGER

BRACKET

GREEN GROUND

WIRE FROM HANGER

BALL

REMOVE THIS	CEILING
SCREW AND	CEILING
LOCKWASHER	COVER

Figure 10

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

4.Cut the speed control switch pull chain and the light switch pull chain to the desired lengths. Connect the wood pendants (supplied) to the pull chains by sliding the pendants (small hole first) onto the pull chains. Then attach the chain couplings (supplied) to the end of the chains and allow the pendants to fall down over the couplings.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

!WARNING

To reduce the risk of personal injury, do not bend the blade flanges when installing the flanges, balancing the blades, or cleaning the fan. Do not insert foreign objects between rotating fan blades.

Installing The

Ceiling Cover

1.Remove the left screw and lockwasher from each side of the hanger bracket (Figure 10) and loosen the other two screws.

NOTE: When installing the ceiling fan using the close-to-the-ceiling method, carefully lift the fan assembly from the hook on the hanger bracket and proceed as follows.

2.Lift the ceiling cover up to the hanger bracket. Engage the slots in the ceiling cover with the loosened screws in the bracket and turn the cover counterclockwise (Figure 10). Be sure that the lockwashers are between the screw heads and the ceiling cover.

3.Install the other two screws and lockwashers; tighten all screws securely.

1.Make sure the three rubber grommets are firmly seated on each of the blade flanges. Then mount the blade flanges to the fan blades using three M5 x 6 washer head blade screws per blade (Figure 11).

M5 x 6 WASHER

HEAD BLADE SCREW (3)

FAN BLADE

ALIGNMENT POST

BLADE FLANGE

RUBBER GROMMETS

Figure 11

CF711CK00, CF711BS00, CF711WW00, CF710AW00, CF711AW00 specifications

The Emerson CF710PB00, CF710BS00, CF710WW00, CF711WB00, and CF711AB00 are part of the renowned Emerson ceiling fan series, known for their blend of style, efficiency, and cutting-edge technology. These models cater to a variety of aesthetic preferences and room sizes, making them versatile choices for modern homes and commercial spaces.

One of the standout features across these models is their stunning design. The CF710 series, available in a range of finishes including polished bronze (CF710PB00), brushed steel (CF710BS00), and white (CF710WW00), offers options that fit seamlessly into any interior décor. The CF711 series further expands on this with the walnut blades of the CF711WB00 and the antique brass finish of the CF711AB00, ensuring there’s a fan for every taste.

In terms of performance, these fans are equipped with powerful yet quiet motors that ensure optimal air circulation without the disruptive noise often associated with traditional ceiling fans. The energy-efficient DC motor technology used in these models not only reduces energy consumption but also allows for a wider range of speed settings. This feature affords users precise control over airflow, making it easy to tailor the environment to their preferences.

Another notable characteristic is the ease of installation, which is a hallmark of Emerson fans. Each model comes with comprehensive instructions and mounting hardware, enabling quick and straightforward setup. Additionally, the fans are compatible with various control options, including pull chains, wall switches, and remote controls, enhancing their user-friendliness.

Moreover, these fans exhibit durability and longevity thanks to their high-quality materials and construction. The blades are designed to withstand the test of time while providing a stylish aesthetic. Some models feature energy-saving LED lighting, providing both illumination and ambience in any room.

In summary, the Emerson CF710PB00, CF710BS00, CF710WW00, CF711WB00, and CF711AB00 ceiling fans are ideal for those seeking efficient cooling solutions paired with stylish designs. With their combination of performance, aesthetic versatility, and user-friendly technology, these models reflect Emerson's commitment to quality and innovation in home comfort. They stand out not just as functional devices but as integral elements that enhance the overall home experience.