RIDGID R213BNA manual Clearing a Jammed Fastener

Page 16

OPERATION

CLEARING A JAMMED FASTENER

See Figure 10.

WARNING:

Disconnect the tool from the air supply before clearing a jammed fastener. Failure to do so could result in serious personal injury.

If a nail or fastener becomes jammed in the tool, disconnect the air hose and keep the tool pointed away from you while clearing the jam.

n�Open magazine and remove fasteners from the tool.

n�Pull up on the latch and open the jam release.

nInsert a flat blade screwdriver into the driving mechanism and push the driver mechanism back, freeing the fastener jam.

nRemove the bent fastener.

nClose the jam release and latch.

nReconnect the tool to the air supply.

nReinstall fasteners and close the magazine.

JAM

RELEASE

LATCH

Fig. 10

16

Image 16

Contents OPERATOR’S Manual R213BNATable of Contents IntroductionGeneral Safety Rules Personal SafetyService Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsAdjustable Exhaust Depth of Drive AdjustmentQUICK-CONNECT Swivel Connector Know Your Brad NailerAssembly OperationUnpacking Packing ListAdjusting the Exhaust Connecting the Tool to AN AIR Supply Loading the Tool with Nails Nails Latch MagazineSingle Sequential Actuation Mode Using the Selectable TriggerContact Actuation Mode Drive Depth Adjustment Setting the AIR PressureRemoving Nails from the Tool Clearing a Jammed Fastener Maintenance AccessoriesTroubleshooting Problem Possible Cause SolutionWarranty Customer Service Information