RIDGID AC9930, TS2400 manual OPERATOR’S Manual

Page 1

OPERATOR’S MANUAL

Work-n-Haul ITTM

Two Wheel Work Stand

AC9930

For Use With Ridgid TS2400

Table Saw And

Ridgid Miter Saws

This work stand has been engineered and manufactured to our high standard for dependability, ease of operation and operator safety. When properly cared for, the work stand will give you years of rugged, trouble-free performance.

WARNING

To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

Thank you for buying a Ridgid product.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Contents OPERATOR’S Manual Introduction Table of ContentsRead ALL Instructions Rules for Safe OperationSafety and International Symbols SymbolsLoose Parts UnpackingTools Needed Assembling the Lower Foot AssemblyMoving the Carry Handle Spring PIN See FigureWork Stand SET-UP Setting UpBefore you start See Figures 4, 5, 6Folding Down Work Stand Fold DownSee Figures 8, 9, 10 LowerOther Portable Power Tools with a Large Base Mounting Power ToolsRidgid 10-in. Table Saw Model TS2400 SET-UP PositionSee Figures 16, 17 Portable Power Tools with a Small BaseWork-N-Haul Ittm Two Wheel Work Stand Model AC9930 Exploded VIEW/REPAIR PartsCustomer Service Information