SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
| Read The Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
| Eye Protection | Always wear safety goggles, safety glasses with side shields, or a full |
| face shield when operating this product. | |
|
| |
| Eye, Ear and Head Protection | Always wear other personal protective equipment such as hearing pro- |
| tection and a hard hat when needed. | |
|
| |
| Keep Hands Away | Keep hands and body away from the discharge area of the tool. |
| Safety Alert | Precautions that involve your safety. |
| Hot Surface | To reduce the risk of injury or damage, avoid contact with |
| any hot surface. | |
|
|
The following signal words and meanings are intended to explain the levels of risk associated with this product.
| SYMBOL SIGNAL | MEANING |
|
|
|
|
|
| DANGER: | Indicates an imminently hazardous situation, which, if not avoided, will result in death |
|
|
| or serious injury. |
|
| WARNING: | Indicates a potentially hazardous situation, which, if not avoided, could result in death |
|
| or serious injury. |
| |
|
|
| |
|
|
|
|
| CAUTION: | Indicates a potentially hazardous situation, which, if not avoided, may result in minor or |
|
|
| moderate injury. |
|
| CAUTION: | (Without Safety Alert Symbol) Indicates a situation that may result in property damage. |
|
SERVICE
Servicing requires extreme care and knowledge and should | WARNING: | |
be performed only by a qualified service technician. For | To avoid serious personal injury, do not attempt | |
service we suggest you return the product to your nearest | to use this product until you read thoroughly and | |
AUTHORIZED SERVICE CENTER for repair. When servic- | understand completely the operator’s manual. | |
ing, use only identical replacement parts. | Save this operator’s manual and review frequently | |
| for continuing safe operation and instructing others | |
| who may use this product. | |
|
|
|
|
|
|
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields or a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
6