RIDGID R885 manual Features, Trigger 24V LITHIUM-ION Battery Pack, 18V NICKEL-CADMIUM Battery Pack

Page 9

FEATURES

PRODUCT SPECIFICATIONS

Blade Diameter	6-1/2 in.
Blade Arbor	5/8 in.
Cutting Depth at 0º	2-1/8 in.
Cutting Depth at 45º	1-5/8 in.
Charger Input	120 V, 60 Hz, AC only

SWITCH

TRIGGER

24V LITHIUM-ION BATTERY PACK
No Load Speed	3,900 r/min. (RPM)
Motor	24 Volt DC
18V NICKEL-CADMIUM BATTERY PACK
No Load Speed	3,200 r/min. (RPM)
Motor	18 Volt DC

LOCK-OFF

BUTTON

SPINDLE

LOCK BUTTON

HEX KEY

STORAGE

5	0

	BEVEL
	ADJUSTMENT
50°	LEVER
50°
ADJUSTMENT
BUTTON

WIDTH OF

CUT SCALE

DEPTH

ADJUSTMENT LEVER

Fig. 1

Image 9

Contents OPERATOR’S Manual Introduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetyBattery Tool USE and Care Specific Safety RulesService Causes and Operator Prevention of KickbackAdditional Safety Rules Safety Rules for Charger Important Safety InstructionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Trigger 24V LITHIUM-ION Battery Pack Features18V NICKEL-CADMIUM Battery Pack Width CUT Scale Depth Adjustment LeverAssembly Removing the Blade Attaching the BladeBlade Spindle Lock Button HEX KEY Tighten LoosenCharge Level Indicator Charging the Battery PackOperation ApplicationsCharging a HOT Battery Pack Charge Level IndicatorCharging a Cool Battery Pack To ChargeVolts, 60 Hz, AC only LED Function of Ridgid 24V LITHIUM-ION ChargerIndicator Full Battery Average Charge Time Evaluate Indicator DefectiveLED Function of Ridgid NICKEL-CADMIUM Chargers RED LED Green LEDTo Remove Battery Pack To Install Battery PackSAW Blades Blade Guard SystemSee Figures 10 KickbackKickback Blade SET TOO Deep Incorrect Support Wrong In. MAXTo Adjust Blade Depth Depth of CUT AdjustmentSTARTING/STOPPING the SAW Indexable LeversSee Figures 17 Operating the SAWTo make the best possible cut Right WrongCross CUTTING/RIP Cutting Using AN Edge GuideSee Figures 19 TOP View of SAW Front of SAWBevel Cutting To Adjust Bevel SettingSee Figures 23 BevelTo Adjust 0 Bevel Stop Bevel StopPocket Cutting General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesAccessories DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredModel No R885 Serial No Customer Service Information