How to Put Your Ceiling Fan Together

1.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.

HANGER

BALL

DOWNROD

SETSCREW

Figure 1

2.Unscrew the setscrew (Figure 2) until it clears the inside of the motor coupling. Then separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 2). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the downrod to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tight- ened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 2) could result in the fan falling.

MOTOR

COUPLING

	HAIRPIN	SETSCREW
		CLEVIS PIN
	CLIP

4.Place the ceiling cover over the downrod, making sure that the large opening faces upward (Figure 3).

HANGER	PIN
BALL

SETSCREW

DOWNROD

CEILING COVER

Figure 3

5.Reinstall the hanger ball (Figure 3) on the downrod as follows. Route the three 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are proper- ly installed could result in the fan falling.

6.The fan comes with blue, black and white leads that are 80-inches long. Before installing the fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

7.Mount blade flanges to fan blades using three 3/16-24 x 5/16” slotted Phillips head screws and three blade washers (Figure 4).

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

HAIRPIN CLIP

DOWNROD

CLEVIS

3/16-24 x 5/16" SLOTTED

PHILLIPS HEAD SCREW (3)

BLADE WASHER (3)

MOTOR COUPLING

SETSCREW

Figure 2

3.Tighten the setscrew (Figure 2) securely while pulling up on the downrod.

NOTE: The setscrew must be properly installed as described above, or fan wobble could result.

FAN BLADE

BLADE FLANGE

Figure 4

8.Turn the fan assembly upside down in preparation for mounting the fan blade assemblies. Remove and discard three shipping retainers securing the motor hub in the motor housing.

CF715PW00, CF715AB00, CF715AW00, CF715S00, CF715WB00 specifications

The Emerson CF715 series of ceiling fans, including models CF715WB00, CF715S00, CF715AW00, CF715AB00, and CF715PW00, are designed to elevate the ambiance of any indoor space while providing exceptional performance and style. Each model in this series is tailored to meet a variety of aesthetic demands and functional needs, making them a versatile choice for homeowners and interior designers alike.

One of the standout features of the CF715 series is its sleek and contemporary design. The fans feature clean lines and a modern silhouette that effortlessly complements a wide range of decor styles, from minimalist to industrial. Available in various finishes such as white, brushed nickel, aged bronze, and walnut, these fans cater to diverse customer preferences.

In terms of performance, the CF715 series is equipped with a powerful yet quiet motor. This ensures that the fans not only circulate air effectively but also operate with minimal noise, providing a comfortable environment for work, relaxation, or sleep. The energy-efficient motor technology used in these fans contributes to reduced energy consumption, making them an eco-friendly option for cooling spaces.

The CF715 series also incorporates versatile blade designs that allow for optimal airflow. Each model typically features four blades that are aerodynamically designed to maximize air movement. Whether it's for a cozy bedroom or an expansive living area, the CF715 fans can meet varying airflow requirements.

Moreover, these fans come with easy-to-use pull-chain controls that allow for effortless operation. Users can conveniently adjust the fan speed and turn the unit on or off with minimal hassle. Certain models may also be compatible with remote controls or wall switches, providing added convenience in adjusting settings from a distance.

Installation of the CF715 series is straightforward, thanks to the user-friendly guide and included mounting hardware. The fans are designed for standard ceiling installation, making them accessible for most DIY enthusiasts.

In summary, the Emerson CF715 series ceiling fans combine stylish design with advanced technology and efficient performance. With features like quiet operation, versatile airflow, and easy installation, these fans are a smart investment for enhancing indoor comfort and aesthetics in any home. Whether choosing the CF715WB00, CF715S00, CF715AW00, CF715AB00, or CF715PW00, customers can expect a quality product that meets their ceiling fan needs.