Electrical Requirements

NOTE: Take care not to scratch fan housing when installing blades.

9.Loosely attach one blade assembly to the motor hub using two 1/4-20 x 1/2” Phillips oval head flange screws (Figure 5). Make sure the screws are NOT tightened. Repeat this procedure for the other four blade assemblies.

10. The blade flanges have an interlocking feature that must be fully engaged before tightening the screws. Make sure all the flanges are properly engaged and then tighten the flange screws. If one of the flanges does not seat properly on the motor hub, loosen the adjacent flange screws, re-engage and reseat the flanges, then tighten the screws again.

SWITCH HOUSING

PLATE

MOTOR HUB

FLANGE BLADE

1/4-20 x 1/2" PHILLIPS OVAL HEAD FLANGE SCREW

Figure 5

11.Engage the connector of the switch housing assembly with the motor connector (Figure 6). The two connectors are keyed and color-coded and must be mated correctly (color-to-color) before they can be engaged. Make sure the connector latch closes properly.

	MOUNTING SCREW	SWITCH HOUSING
	MOUNTING SCREW	ASSEMBLY
		ASSEMBLY

Figure 7

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

The outlet box must be securely anchored and capa- ble of withstanding a load of at least 50 pounds.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

To avoid fire or shock, follow all wiring instructions carefully.

SWITCH HOUSING

ASSEMBLY

SWITCH HOUSING

CONNECTOR

LATCH

MOTOR CONNECTOR

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

How to Hang

Your Ceiling Fan

!WARNING

Figure 6

MOUNTING SCREW

12.Remove the three mounting screws from the switch housing plate (Figure 6). Position the switch housing assembly on the switch housing plate and secure using the three mounting screws (Figure 7).

NOTE: Do not pinch wires between the switch housing assembly and the switch housing plate.

13.You have now completed the assembly of your new ceiling fan. You can now proceed with hang- ing and wiring your fan.

The fan must be hung with at least 7' of clearance from floor to blades (Figure 8).

CEILING

AT LEAST

FLOOR

Figure 8

CF715PW00, CF715AB00, CF715AW00, CF715S00, CF715WB00 specifications

The Emerson CF715 series of ceiling fans, including models CF715WB00, CF715S00, CF715AW00, CF715AB00, and CF715PW00, are designed to elevate the ambiance of any indoor space while providing exceptional performance and style. Each model in this series is tailored to meet a variety of aesthetic demands and functional needs, making them a versatile choice for homeowners and interior designers alike.

One of the standout features of the CF715 series is its sleek and contemporary design. The fans feature clean lines and a modern silhouette that effortlessly complements a wide range of decor styles, from minimalist to industrial. Available in various finishes such as white, brushed nickel, aged bronze, and walnut, these fans cater to diverse customer preferences.

In terms of performance, the CF715 series is equipped with a powerful yet quiet motor. This ensures that the fans not only circulate air effectively but also operate with minimal noise, providing a comfortable environment for work, relaxation, or sleep. The energy-efficient motor technology used in these fans contributes to reduced energy consumption, making them an eco-friendly option for cooling spaces.

The CF715 series also incorporates versatile blade designs that allow for optimal airflow. Each model typically features four blades that are aerodynamically designed to maximize air movement. Whether it's for a cozy bedroom or an expansive living area, the CF715 fans can meet varying airflow requirements.

Moreover, these fans come with easy-to-use pull-chain controls that allow for effortless operation. Users can conveniently adjust the fan speed and turn the unit on or off with minimal hassle. Certain models may also be compatible with remote controls or wall switches, providing added convenience in adjusting settings from a distance.

Installation of the CF715 series is straightforward, thanks to the user-friendly guide and included mounting hardware. The fans are designed for standard ceiling installation, making them accessible for most DIY enthusiasts.

In summary, the Emerson CF715 series ceiling fans combine stylish design with advanced technology and efficient performance. With features like quiet operation, versatile airflow, and easy installation, these fans are a smart investment for enhancing indoor comfort and aesthetics in any home. Whether choosing the CF715WB00, CF715S00, CF715AW00, CF715AB00, or CF715PW00, customers can expect a quality product that meets their ceiling fan needs.