RIDGID AC99401 Folding and Moving Workstand, Folding LEG and Table, See Figures 12, 13, Lower

Page 11

ASSEMBLY

FOLDING AND MOVING WORKSTAND

See Figures 12, 13, and 14.

Fig. 12

Before You Start

nRemove any workpieces, clamps or other accessories.

nMake sure miter saw is securely attached to the stand per the instructions in this manual.

nIf a miter saw is already assembled to the stand, make sure to place the blade 90° to the table (if applicable), miter the blade to the right as far as it will go, place the blade in the “locked down” position, and lock all knobs and levers.

FOLDING LEG AND TABLE

nLoosen the roller foot knob and slide foot extension up. Tighten knob.

nRelease locking pin and raise foot.

nLoosen the extension bar handle and slide extension bar in towards table. Tighten extension bar handle.

nRepeat for the other side.

nAt the wheel end of the stand firmly grab the lift handle/ lock lever and squeeze the lever.

nFully lift table by the lift handle, then slowly lower table down to the frame

WARNING:

To avoid serious personal injury when lifting, bend your knees so you can lift with your legs, not your back.

NOTE: You may need to adjust the speed at which you bring up the table in order to get the leg to fold.

LOWER THE

TABLE

Fig. 13

nLift stand into upright position pull out on the locking pin, and swing the legs until they lock in place against the bottom of the table.

nMake sure the stand will remain upright on its own.

CAUTION:

If the stand will not remain upright, store in the horizontal position.

nThe workstand can be moved by pulling or pushing. To keep the workstand from tipping over, pulling the unit is the preferred method when moving over a door threshold or crack.

NOTE: If desired, with the help of a second person, the foot of the stand may also be used as a carry handle as shown.

If a sliding compound miter saw is mounted on the workstand, it may be necessary to slide the power head/ blade assembly forward and lock in place when going through doorways or other narrow openings.

LOCKING PIN

PUSH THE

LEGS

Fig. 14

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Introduction Table of ContentsRead ALL Instructions Rules for Safe OperationSafety and International Symbols SymbolsTools Needed UnpackingLoose Parts See Figures 1 d AssemblyAttaching the Lower Foot Mounting WheelsSee Figures 4 Setting UPWorkstand SET-UP See Figures 6 Mounting Miter SAWCompound Miter SAW Ridgid Mounting HolesDo not Drill Holes Shaded Areas Mounting and Aligning Roller AssemblyMounting Other Brands Center the Miter SAW on the WORK- StandLEG Foot Knob Adjustable Handle Locking PIN KnobExtension Bars Operation See Figures 10Lower Folding and Moving WorkstandFolding LEG and Table See Figures 12, 13,See Figures 16 MaintenanceKeep Area Clean Lubricated Transporting Tool1937 Exploded VIEW/REPAIR PartsPage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information

AC99401 specifications

The RIDGID AC99401 is a robust and versatile air compressor designed to meet the demands of both professionals and DIY enthusiasts. Manufactured by RIDGID, a brand renowned for its quality tools, the AC99401 combines advanced technologies with practical features, making it a reliable choice for various applications.

One of the standout features of the RIDGID AC99401 is its oil-free pump. This technology eliminates the need for regular maintenance and oil changes, allowing users to spend more time on their projects and less time caring for the equipment. The oil-free pump design also ensures that the air produced is clean, making it suitable for tasks that require contamination-free air, such as painting and inflating.

Equipped with a powerful motor, the AC99401 delivers impressive air pressure and flow rates. This high-performance compressor can generate a maximum pressure of 125 PSI, providing enough power for a range of pneumatic tools, including nailers, staplers, and air sprayers. The compressor’s ability to maintain consistent pressure levels makes it ideal for both small-scale home projects and more extensive professional jobs.

Portability is another significant advantage of the RIDGID AC99401. The design includes a lightweight, compact form factor complemented by a sturdy handle and rubberized feet for stability. This makes it easy to transport to different job sites or around the home, while its space-saving design allows for easy storage in tight areas.

The AC99401 also features an integrated control panel with a quick-release drain valve, making it user-friendly. The gauges provide a clear view of pressure levels, ensuring that users can monitor their operation effectively. Additionally, the unit is equipped with a thermal overload protection system that safeguards the compressor from overheating, prolonging its lifespan.

Overall, the RIDGID AC99401 air compressor encapsulates a perfect blend of power, efficiency, and convenience. Its innovative technologies make it suitable for a wide range of applications, from simple household tasks to demanding professional jobs. With its durability and reliability, the AC99401 stands out as an excellent investment for anyone looking to enhance their toolkit with a dependable air compressor.
Top Page Image Contents