RIDGID R3200 manual Removing Blade, See Figure

Page 11

ASSEMBLY

REMOVING BLADE

See Figure 3.

Follow these directions to remove the blade.

■Unplug the saw.

CAUTION:

To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.

■Depress spindle lock button.

■Remove blade screw by turning it counterclockwise with the wrench.

■Remove outer blade washer ("D" washer).

■Lift lower blade guard.

■Remove blade.

SPINDLE

LOCK

BUTTON

WRENCH

BLADE

SCREW

Fig. 3

11

Image 11

Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyCauses and Operator Prevention of Kickback Specific Safety RulesService Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsElectrical Connection SpecificationsElectrical Double Insulation Applications Features Unpacking Features See Figures 2 and 2a AssemblyAttaching Blade See Figure Removing BladeBlade Guard System OperationSAW Blades See , 6, 7, KickbackSTARTING/STOPPING the SAW Adjusting Blade DepthSee Figures 11, 12, Operating the SAWSee Figures 15 Cross CUTTING/RIP CuttingTo RIP CUT See Figures 17 To Adjust Bevel SettingBevel Cutting To Bevel CUTLength of CUT Scale Pocket CuttingPositive 0 Bevel Stop AdjustmentsBearing Lubrication MaintenanceGeneral HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the Limited Three Year Warranty4 in mm Circular Saw R3200 Double Insulated Customer Service Information