Operating Your Ceiling Fan | Emerson CF720PW00, CF720ORB00 instruction

BP7309 BANFF 1/5/06 9:59 AM Page 11

9. Position the downlight fitter assembly on the light fitter adapter plate so that the two screws and lockwashers mate with the keyhole slots in the downlight fitter assembly. Make sure that all wires and wire connectors are positioned within the downlight fitter assembly. Rotate the downlight fitter assembly clockwise and tighten the two screws. Install the other M4 x 8mm oval head screw and lockwasher in the remaining hole in the downlight fitter assembly.

! WARNING

Make sure there are no wires pinched between the light fitter and the fitter adapter plate.

Operating Your

Ceiling Fan

IMPORTANT

Fan installation must be completed, including the installation of the fan blades, before testing of the remote control.

Your Fan/Light Wall Control (Figure 15) has full control of your fan and lights. However, airflow direction is controlled by a slide switch on the switch housing.

1.Restore electrical power to the outlet box by turning the electricity on at the service panel.

NOTE: Make sure that the ON/OFF slide switch on the Fan/Light Wall Control is in the ON position.

DOWNLIGHT FITTER ASSEMBLY

TAB

FLAT

AREA

Figure 14

INSTALL THREE M4 x 8mm OVAL HEAD SCREWS AND LOCKWASHERS

60-WATT (MAX.)

CANDELABRA BULB (2)

LOWER

GLASS

BOWL

2. To set the desired fan speed, press the HI, MED, or LOW buttons to operate your fan on high, medium, or low speed (Figure 15).

3. To turn your fan off, press the OFF button.

4. To set the level of light brightness, press and hold the LIGHT button. The light brightness will continue to increase then decrease while the button is held down. When the lights are at the desired brightness, release the button.

5. To turn the lights on and off, press and

10. Screw in two 60-watt (maximum) candelabra bulbs (not supplied) in the light fitter sockets (Figure 14).

11. Place the lower glass bowl into the downlight fitter, aligning the three flat areas on the glass bowl flange with the three tabs on the downlight fitter (Figure 14). Then turn the lower glass bowl clockwise until the glass bowl stops turning.

12. Your ceiling fan is now installed and wired to be controlled by your SW101 Fan/Light Wall Control.

release the LIGHT button. The lights will turn on at the light level previously set (see step 4).

6. If airflow is desired in the opposite direction, turn the fan off and wait for the blades to stop turning. Then slide the reversing switch (on the motor and housing uplight assembly) to the opposite position (Figure 16) and turn the fan on again. The blades will turn in the opposite direction and reverse the airflow.

CF720PW00, CF720WB00, CF720ORB00 specifications

The Emerson CF720 series ceiling fans, which includes the models CF720PW00, CF720ORB00, and CF720WB00, are designed to enhance both the aesthetic and functional aspects of home environments. These fans come with several advanced features and technologies, making them an ideal choice for any room in the house.

One of the standout features of the Emerson CF720 models is their sleek design, which is available in three distinct finishes: Pure White (PW), Oil-Rubbed Bronze (ORB), and Walnut (WB). This variety allows homeowners to choose a fan that complements their interior decor, whether it's a contemporary, traditional, or rustic setting. The clean lines and elegant profiles of these fans ensure they look good while providing excellent airflow.

In terms of performance, the CF720 fans are equipped with powerful and efficient motors that are engineered for durability and quiet operation. This makes them perfect for use in bedrooms, living rooms, or any area where peace and tranquility are desired. The fans boast an impressive airflow capability, making them suitable for larger spaces while maintaining energy efficiency.

The Emerson CF720 series incorporates a reversible motor, allowing for versatility in airflow direction. In warm months, the fan can create a refreshing breeze by spinning counterclockwise. Conversely, in cooler months, the fan can be reversed to distribute heat evenly throughout the room, ensuring comfort year-round.

Another remarkable feature is the fan's compatibility with various control options. The CF720 fans can be used with pull chain controls for easy manual operation, while also being compatible with remote control systems for added convenience. This adaptability is a significant advantage for those who appreciate modern home automation.

Furthermore, the Emerson CF720 models are engineered for easy installation, with a template that simplifies the mounting process. Each fan also incorporates high-quality materials, ensuring long-lasting performance and reliability. Safety features, such as secure blade attachments, further enhance their usability.

The Emerson CF720PW00, CF720ORB00, and CF720WB00 ceiling fans represent a harmonious blend of style, functionality, and innovation. With their energy-efficient motors, versatile control options, and aesthetic appeal, they are an excellent investment for enhancing the comfort and ambiance of any living space.