Electrical Requirements

IMPORTANT: Your ceiling fan is supplied with an Fan/Light Dual Slide Wall Control (transmitter). This allows you to regulate your ceiling fan speed, airflow direction, and light intensity. Optional Emerson Electric Remote and Wall Control may also be used, see store or catalog.

IMPORTANT: Your ceiling fan will not function properly and may be damaged, if used with any wall dimmer switch or control other than the Emerson controls listed above.

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 50 lbs. or Less”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

Ceiling Fan Assembly

Procedures

IMPORTANT: Remove the five motor retainers from the motor hub and discard the retainers and retainer screws before installation of flange/blade assembly (Figure 1).

SHIPPING

RETAINERS (5)

Figure 1

1.Position the flange medallion upside down on a soft, clean surface. Place the blade with the decorative side facing down onto the flange medallion. Attach the flange assembly to the blade and flange medallion using the four #10-32 x 22mm oval head screws as shown in Figure 2. Repeat for the four remaining blades.

FLANGE MEDALLION

ASSEMBLY

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with national and local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

WARNING

To avoid possible fire or shock, follow all wiring instructions carefully. Any electrical work not described in these instructions should be done or approved by a licensed electrician.

FAN BLADE

FAN FLANGE

	#10-32 x 22mm OVAL
	HEAD BLADE SCREW
Figure 2	(4 per blade/flange)
Figure 2

NOTE: Take care not to scratch fan housing when installing blades.

2.The flange assemblies have interlocking tabs, be sure that the flanges are installed in a clockwise manner to engage the interlocking feature. Be sure all the flanges are properly engaged and then tighten the flange screws. If one of the flanges do not seat properly on the motor hub, loosen the adjacent flange screws, re-engage and reseat the flanges, then tighten the screws again.

3.Attach the blade/flange assembly using two 1/4-20 x 12mm oval head screws (Figure 3). Install the remaining four fan blades assemblies using the same procedure.

4.Gently snug all flange screws to the motor housing, working around the housing in a clockwise sequence. Failure to follow this procedure could result in fan wobble. This completes the blade installation.

4	U.L. Model No.: CF830

CF830GES00 specifications

The Emerson CF830GES00 is an advanced ceiling fan that blends aesthetic appeal with functionality, making it an ideal choice for modern homes and offices. With its sleek design and powerful performance, it offers an effective solution for enhancing airflow and comfort in various indoor spaces.

One of the main features of the CF830GES00 is its energy-efficient motor. The fan is equipped with a high-performance DC motor that operates quietly while consuming minimal energy. This significantly reduces electricity costs compared to traditional AC motors. The ability to run efficiently while still providing ample airflow makes it an attractive option for eco-conscious users.

The fan boasts a size of 52 inches, which makes it suitable for medium to large rooms. It comes with three expertly designed blades that not only enhance the aesthetics of the fan but also ensure optimal air circulation. The proprietary blade design minimizes noise while maximizing airflow, allowing for a comfortable atmosphere without the disruption often associated with ceiling fans.

Another standout technology in the CF830GES00 is its integrated LED lighting system. The fan features a dimmable LED light kit that delivers ample illumination, making it versatile enough to replace standard ceiling fixtures. This integration of lighting and airflow creates a streamlined design, reducing the need for additional light sources in the room.

Control options are another highlight of the Emerson CF830GES00. It is compatible with both handheld remote control and wall-mounted control options, allowing users to adjust settings conveniently from anywhere in the room. The fan also offers multiple speed settings and a reverse function, enhancing its versatility by allowing airflow direction adjustment for seasonal changes.

The fan's elegant aesthetics are complemented by a variety of finish options, including brushed nickel and matte black, enabling homeowners to select a style that best suits their décor. The CF830GES00 is designed with durability in mind, featuring a robust construction that ensures longevity and reliable performance over time.

Overall, the Emerson CF830GES00 is an excellent investment for those seeking a stylish and functional ceiling fan. Its energy-efficient motor, integrated LED lighting, versatile control options, and stunning design make it a standout choice for enhancing indoor comfort and ambiance.