Grommet Coupling Cover | Emerson CF830GES00 instruction

11.Obtain the 10” hanger ball/downrod assembly and remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 7). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in Step 22. Discard the 10” downrod if using the 4.5” downrod.

MOTOR

COUPLING

	SETSCREW (2)	HAIRPIN
	CLEVIS PIN	HAIRPIN
	CLEVIS PIN	CLIP

HANGER

BALL

DOWNROD

SETSCREW

Figure 7

NOTE: The longer downrod (10”) furnished with the ceiling fan provides the minimum recommended floor-to-fan blade clearance for a 9-

CLEVIS

UPPER

SETSCREW

MOTOR COUPLING

Figure 8

DOWNROD

CLEVIS

HAIRPIN

CLIP

SETSCREW (2)

foot ceiling. The 4.5” downrod (supplied) is to be used for shorter ceilings.

12.Separate, untwist and unkink the black, white and blue motor 80” motor leads. Route these wires through the desired downrod.

13.Loosed the two setscrews in the motor coupling. Slide the downrod down the wires and seat the downrod in the motor coupling (Figure 8).

14.Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 8). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the downrod to make sure the clevis pin is properly installed.

15.While pulling up on the downrod, securely tighten the two setscrews in the motor coupling (Figure 8).

NOTE: The two setscrews must be properly installed as described above, or fan wobble could result.

WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

NOTE: If installing ceiling fan on shorter ceilings and using the 4.5” downrod, proceed to Step 16 and then onto Step 21.

If installing ceiling fan on a minimum recommended floor-to-fan clearance for a 9-foot ceiling using the 10” downrod, proceed to Step 17.

16.4.5” Downrod Installation: Be sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Be sure that the coupling cover is oriented correctly (Figure 9). Proceed to Step 21 to complete assembly.

4.5" DOWNROD

GROMMET

COUPLING COVER

Figure 9

6	U.L. Model No.: CF830

CF830GES00 specifications

The Emerson CF830GES00 is an advanced ceiling fan that blends aesthetic appeal with functionality, making it an ideal choice for modern homes and offices. With its sleek design and powerful performance, it offers an effective solution for enhancing airflow and comfort in various indoor spaces.

One of the main features of the CF830GES00 is its energy-efficient motor. The fan is equipped with a high-performance DC motor that operates quietly while consuming minimal energy. This significantly reduces electricity costs compared to traditional AC motors. The ability to run efficiently while still providing ample airflow makes it an attractive option for eco-conscious users.

The fan boasts a size of 52 inches, which makes it suitable for medium to large rooms. It comes with three expertly designed blades that not only enhance the aesthetics of the fan but also ensure optimal air circulation. The proprietary blade design minimizes noise while maximizing airflow, allowing for a comfortable atmosphere without the disruption often associated with ceiling fans.

Another standout technology in the CF830GES00 is its integrated LED lighting system. The fan features a dimmable LED light kit that delivers ample illumination, making it versatile enough to replace standard ceiling fixtures. This integration of lighting and airflow creates a streamlined design, reducing the need for additional light sources in the room.

Control options are another highlight of the Emerson CF830GES00. It is compatible with both handheld remote control and wall-mounted control options, allowing users to adjust settings conveniently from anywhere in the room. The fan also offers multiple speed settings and a reverse function, enhancing its versatility by allowing airflow direction adjustment for seasonal changes.

The fan's elegant aesthetics are complemented by a variety of finish options, including brushed nickel and matte black, enabling homeowners to select a style that best suits their décor. The CF830GES00 is designed with durability in mind, featuring a robust construction that ensures longevity and reliable performance over time.

Overall, the Emerson CF830GES00 is an excellent investment for those seeking a stylish and functional ceiling fan. Its energy-efficient motor, integrated LED lighting, versatile control options, and stunning design make it a standout choice for enhancing indoor comfort and ambiance.