Electrical Requirements

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local Codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

!WARNING

To avoid fire or shock, follow all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

How to Hang Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 1).

CEILING

OUTLET BOX

AT LEAST

FLOOR

Figure 1

MOUNTING

PLATE

MOUNTING SCREW (SUPPLIED WITH OUTLET BOX)

Figure 2

LEVELING WASHERS (IF REQUIRED)

HOOK

!WARNING

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs.

!WARNING

1.Securely attach the mounting plate to the outlet box (Figure 2) using two screws (supplied with outlet box). Pull the black, white and ground wires out of the outlet box through the hole in the mounting plate and lay them to the side as shown in Figure 3.

NOTE: For better fan performance make sure the mounting plate is level. Additional washers (not included) may be needed to insert between the electrical box and mounting plate (Figure 2).

RUBBER WASHER

MOUNTING

THREADEDPLATE STUDS

SUPPLY WIRE LEADS

FAN MOTOR ASSEMBLY

MOTOR

BRACKET

Figure 3

2.Carefully lift the fan motor assembly and engage the slot in the motor bracket with the hook on the mounting plate so that it is securely suspended (Figure 3). Then connect wiring to your fan according to section "HOW TO WIRE YOUR CEILING FAN".

CF805SS 00, CF805SPB 00, CF805SW 00, CF805SAB 00, CF805SBS 00 specifications

The Emerson CF804SW 00, CF805SWW 00, CF804SPB 00, CF804SAB 00, and CF804SWW 00 are standout ceiling fan models that exemplify the perfect combination of style, efficiency, and modern technological features, making them ideal choices for any home or office space.

One of the main features of these Emerson ceiling fans is their sleek and contemporary design. With a variety of finishes, including polished nickel, brushed steel, and rich wood tones, these fans can easily complement various interior styles, from modern to minimalist and even traditional aesthetics. The stylish blades are designed not just for looks but for optimal air circulation, ensuring that every corner of the room feels comfortable.

Innovative technologies contribute to the unmatched performance of these fans. They are equipped with efficient DC motors, which provide powerful airflow while consuming significantly less electricity than traditional AC motors. This energy-efficient operation leads to decreased utility bills and a smaller carbon footprint, making the Emerson models an eco-friendly choice for consumers.

Furthermore, the Emerson CF804SW 00 and similar models feature multiple speed settings, allowing users to customize their comfort levels based on personal preference and room conditions. With whisper-quiet operation, these fans create a serene environment without any distracting noise, making them suitable for bedrooms, living areas, and workplaces.

One of the standout characteristics of the Emerson fans is their compatibility with smart home systems. Many models come with remote control functionality, enabling users to adjust the speed and light settings from anywhere in the room. Some variants are also compatible with smart home devices, allowing for voice activation and seamless integration with home automation systems.

Durability is another critical aspect of these Emerson ceiling fans. Constructed from high-quality materials, they are designed to withstand the test of time while maintaining their aesthetic appeal. Additionally, these fans are often backed by warranties, providing peace of mind regarding their longevity and reliability.

In conclusion, the Emerson CF804SW 00, CF805SWW 00, CF804SPB 00, CF804SAB 00, and CF804SWW 00 ceiling fans are exceptional choices that combine elegant design with advanced technologies and admirable energy efficiency, making them a valuable addition to any home or office.