How to Put Your Ceiling Fan Together

1.Pass the 80" motor leads through the opening in the ceiling cover. Be sure the cover is oriented cor- rectly.

2.Separate, untwist and unkink the three motor leads. Route the motor leads through the hanger ball/downrod assembly.

3.Loosen the upper two 3/16-24 x 3/8” setscrews in the motor coupling. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 1). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the hanger ball to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed could result in the fan falling.

4.While pulling up on the hanger ball, tighten the two upper 3/16-24 x 3/8” setscrews in the motor cou- pling securely (Figure 1).

NOTE: The setscrews must be properly installed as described above, or fan wobble could result.

(3) 3/16-24 x 5/16" SLOTTED PHILLIPS BLADE SCREWS

(3) BLADE WASHERS

BLADE FLANGE

Figure 2

FAN BLADE

7.Turn fan assembly upside down in preparation for mounting fan blade assemblies.

NOTE: Take care not to scratch fan housing when installing blades.

8.Align holes in blade assembly with holes in motor hub and rotate motor hub until one of the flange screw holes is visible through slot in switch housing plate. Attach blade assembly to motor hub using 1/4-20 x 1/2” Phillips oval head flange screw (Figure 3). Rotate motor hub until other flange screw hole is visible through slot and install second screw. Make sure screws are tightened securely. Repeat this procedure for other four blade assemblies.

1/4-20 x 1/2"
FLANGE SCREWS (2)
(INSTALL THROUGH SLOT	SWITCH HOUSING
IN SWITCH HOUSING PLATE)	PLATE

MOTOR

HUB

CEILING

COVER

CLEVIS

3/16-24 x 3/8"

SETSCREW

MOTOR COUPLING

Figure 1

HANGER BALL/ DOWNROD ASSEMBLY

CLEVIS

HAIRPIN

CLIP

Figure 3

9. Engage the connector of the switch housing assembly with the motor connector (Figure 4). The two connectors are keyed and color-coded and must be mated correctly (color-to-color) before they can be engaged. Make sure the connector latch closes properly.

5.The fan comes with blue, black and white leads that are 80” long. Before installing fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

6.Mount blade flanges to fan blades using three 3/16- 24 x 5/16” slotted Phillips blade screws and three blade washers (Figure 2).

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, bal- ancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

SWITCH MOTOR HOUSING CONNECTOR

SWITCH HOUSING CONNECTOR ASSEMBLY

Figure 4

CF796MP0, CF796HGMO0, CF796CW0 specifications

The Emerson CF796 series ceiling fans, including the CF796HGMO0, CF796MP0, and CF796CW0 models, represent a synergy of aesthetic design and advanced technology, tailored for modern living spaces. These fans are engineered with efficiency and versatility in mind, suitable for various room sizes and decor styles.

One of the standout features of the CF796 series is its sleek design, available in multiple finishes that can seamlessly integrate into both contemporary and traditional interiors. The High Gloss Mocha, Matte Black, and Cool White options cater to diverse preferences, allowing homeowners to select a fan that complements their specific aesthetic.

The CF796 series incorporates a powerful motor that ensures optimal air movement, promoting efficient cooling and improved airflow throughout any setting. This engine is designed to operate quietly, facilitating a serene environment, whether in a bedroom, living room, or office. The fans are equipped with a three-speed setting, allowing users to customize airflow intensity based on their personal comfort needs.

A significant technological advancement in the Emerson CF796 series is its compatibility with smart home systems. Many models support Wi-Fi connectivity, enabling users to control their ceiling fans remotely via smartphone applications. This feature not only enhances convenience but also encourages energy efficiency, allowing for automatic adjustments based on occupancy or time of day.

Another notable characteristic is the integrated LED lighting that is both bright and energy-saving. These ceiling fans come with adjustable light settings, providing flexibility in ambiance and illumination. The lights are designed to last longer than traditional bulbs, further contributing to cost savings over time.

Installation of the CF796 models is designed to be user-friendly. Each fan comes with detailed instructions and includes a comprehensive mounting system, making it accessible for both seasoned DIYers and those new to home improvement projects.

In summary, the Emerson CF796HGMO0, CF796MP0, and CF796CW0 ceiling fans combine stylish aesthetics with robust technology. Their efficient motors, smart connectivity, versatile speed settings, and integrated LED lighting make them an excellent choice for homeowners looking to enhance their comfort and style while being mindful of energy consumption. Whether upgrading an existing space or outfitting a new one, the Emerson CF796 series offers a perfect blend of form and function.