Electrical Requirements

10.Remove the three switch housing screws from the switch housing plate. Position the switch housing assembly on the switch housing plate and align the holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the three screws (Figure 5).

!	WARNING
To avoid possible fire or shock, do not pinch wires
between the switch housing assembly and the
switch housing plate.

11. You have now completed the assembly of your new
ceiling fan. You can now proceed with the hanging and
the electrical wiring of your fan.		Figure 5
		Figure 5

SWITCH

HOUSING ASSEMBLY

MOUNTING

SCREWS (3)

Your new ceiling fan will require a grounded electrical sup- ply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid pos- sible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

!WARNING

To avoid fire or shock, follow all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

How to Hang Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 6).

CEILING

AT LEAST

Figure 6	FLOOR

!WARNING

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs.

!WARNING

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 7.)

OUTLET

BOX

HANGER

BRACKET

	TWO SCREWS
	SUPPLIED WITH	TAB
	OUTLET BOX	TAB
	OUTLET BOX
	Figure 7

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

2.Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 8). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 7).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

CF796MP0, CF796HGMO0, CF796CW0 specifications

The Emerson CF796 series ceiling fans, including the CF796HGMO0, CF796MP0, and CF796CW0 models, represent a synergy of aesthetic design and advanced technology, tailored for modern living spaces. These fans are engineered with efficiency and versatility in mind, suitable for various room sizes and decor styles.

One of the standout features of the CF796 series is its sleek design, available in multiple finishes that can seamlessly integrate into both contemporary and traditional interiors. The High Gloss Mocha, Matte Black, and Cool White options cater to diverse preferences, allowing homeowners to select a fan that complements their specific aesthetic.

The CF796 series incorporates a powerful motor that ensures optimal air movement, promoting efficient cooling and improved airflow throughout any setting. This engine is designed to operate quietly, facilitating a serene environment, whether in a bedroom, living room, or office. The fans are equipped with a three-speed setting, allowing users to customize airflow intensity based on their personal comfort needs.

A significant technological advancement in the Emerson CF796 series is its compatibility with smart home systems. Many models support Wi-Fi connectivity, enabling users to control their ceiling fans remotely via smartphone applications. This feature not only enhances convenience but also encourages energy efficiency, allowing for automatic adjustments based on occupancy or time of day.

Another notable characteristic is the integrated LED lighting that is both bright and energy-saving. These ceiling fans come with adjustable light settings, providing flexibility in ambiance and illumination. The lights are designed to last longer than traditional bulbs, further contributing to cost savings over time.

Installation of the CF796 models is designed to be user-friendly. Each fan comes with detailed instructions and includes a comprehensive mounting system, making it accessible for both seasoned DIYers and those new to home improvement projects.

In summary, the Emerson CF796HGMO0, CF796MP0, and CF796CW0 ceiling fans combine stylish aesthetics with robust technology. Their efficient motors, smart connectivity, versatile speed settings, and integrated LED lighting make them an excellent choice for homeowners looking to enhance their comfort and style while being mindful of energy consumption. Whether upgrading an existing space or outfitting a new one, the Emerson CF796 series offers a perfect blend of form and function.