Fujitsu plasmavision user manual Press Eor Fto select Picture, Press Cor Dto select Tint

BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS

• Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint))

1

2

3

4

(Ex. the W/R models)

Press ;.

The main menu screen will appear.

Press Eor Fto select “PICTURE”.

Each time you press Eor F, one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO	FEATURES
FACTORY DEFAULT
The PICTURE Menu screen will appear.	“PICTURE” selected in the main
	menu screen

Press Cor Dto select “Tint”.

Press <.

The “Tint” adjustment screen will appear.

“Tint” selected in the PICTURE Menu screen

5

6

7

Press Eor Fto change tint values.

F: More greenish colors

E: More purplish colors

Press <to store.

Press ;when you finish.

“Tint” adjustment screen

*Repeat steps 3, 4, 5 and 6 when you wish to make changes to other options.

*When <is pressed after you have selected “Default”, the settings are returned to those that were valid when you purchased the set.

*Press ;to halt the operation in progress.

Note

•On-screen information disappears if you do not take any action for about 60 seconds.

•Functions may not be available with some models and some device options.

•The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.

E-20