Fujitsu plasmavision user manual Installation, Display Section Front Side, Reference

INSTALLATION

To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. To ensure proper heat radiation, provide at least as much space around the display as shown below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

*To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.

Display Section
	Front		Side
	Upper	(cm)	(cm)
	10
10		10	Wall
Left		Right
	5
	Lower		3.5 (for 42”/50”)
			5 (for 55”/63”)

Póññêèé Português Italiano Français Español Deutsch English

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P. E-9 for more information on options.

E-3

÷–Œƒ

日 本 語