Fujitsu plasmavision user manual Selecting Input Mode, Press =to select the input Mode

SELECTING INPUT MODE

VIDEO INPUT MODE (for the W/R models)

1	Press "-=to select the input
	mode.
	You can select from VIDEO1 mode to VIDEO4
	mode.
	The video modes corresponding to each input
	terminal are as follows.
	• VIDEO1: Video
	• VIDEO2: S-video	Video1 mode
	• VIDEO3: Component video
	• VIDEO4: Component video

* For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-31.

*You can also use the buttons on the display’s control panel to perform these steps.

VIDEO INPUT MODE (for the U model)

1	Press "-&to select the input
	mode.
	You can select from VIDEO1 mode to VIDEO5
	mode.
	The video modes corresponding to each input
	terminal are as follows.
	• VIDEO1: Video
	• VIDEO2: S-video	Video1 mode
	• VIDEO3: Component video
	• VIDEO4: Component video
	• VIDEO5: HDMI

* For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-31.

*You can also use the buttons on the display’s control panel to perform these steps.

E-14