BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
2
3
4
*You can also use the buttons on the display’s control panel to perform these steps.
(for the W/R models)
Press/I to the left at the bottom of the display to the ONstate.
The power lamp lights up.
Press on the remote control.
The color of the power lamp changes from “Red” to “Green”.
Press "– &or )– *.
Select the video mode to input.
Press when the power is ON.
The color of the power lamp changes from “Green” to “Red” and the the power turns “OFF
*You can also use the buttons on the display’s control panel to perform these steps.
(for the U model)
