Fujitsu plasmavision user manual Adjusting the Picture

ADJUSTING THE PICTURE

•Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20 for the basic operation procedures.

Adjusting the Signal Contrast

Press Fto increase the input signal contrast.

Press Eto reduce the input signal contrast.

Press <to store.

Adjusting the Drive Contrast

Press Fto raise the display’s luminance level, and increase the contrast.

Press Eto lower the display’s luminance level, and reduce the contrast.

Press <to store.

Adjusting the Brightness

Press Fto increase the brightness.

Press Eto reduce the brightness.

Press <to store.

Adjusting Color

Press Fto darken the color.

Press Eto lighten the color.

Press <to store.

Adjusting the Tint

Press Fto change the tint to a more greenish color.

Press Eto change the tint to a more purplish color.

Press <to store.

Adjusting the Sharpness

Press Fto sharpen the Sharpness.

Press Eto soften the Sharpness.

Press <to store.

Adjusting the Ambient Sensor

Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area. Each time Eor Fis pressed, the setting is switched.

On Off

Press <to store.

Póññêèé Português Italiano Français Español Deutsch English

中文

Note

•The screen display disappears if there is no operation within approximately 60 seconds.

•Depending on the model or the optional devices, some of the functions may not be available.

•The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

E-21

日 本 語