How to Put Your Ceiling Fan Together

1.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.

HANGER

BALL

DOWNROD

SETSCREW

Figure 1

2.Loosen the two setscrews in the motor coupling and separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the down- rod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 2). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the downrod to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tight- ened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 2) could result in the fan falling.

4.Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure that the ceiling cover and the coupling cover are both oriented correctly (Figure 3).

CEILING

COVER

DOWNROD

GROMMET

COUPLING COVER

Figure 3

5.Reinstall the hanger ball (Figure 4) on the downrod as follows. Route the three 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are proper- ly installed could result in the fan falling.

M5 x 10

SETSCREW

CLEVIS PIN

MOTOR

COUPLING

HAIRPIN	PIN
CLIP

	HANGER
	BALL
JAM NUT	DOWNROD

MOTOR	HAIRPIN CLIP
COUPLING	M5 x 10
CLEVIS	M5 x 10
CLEVIS	SETSCREW	DOWNROD
PIN		DOWNROD
PIN

SETSCREW

Figure 2	Figure 4

3.While pulling up on the downrod, securely tighten the two setscrews in the motor coupling.

6.The fan comes with blue, black and white leads that are 80-inches long. Before installing the fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

7.Mount blade flanges to fan blades using three M5 x 6 slotted Phillips screws and three blade washers (Figure 5).

CF770OB02, CF770ORB02, CF770AW02, CF770BC02, CF770BS02 specifications

The Emerson CF770 series ceiling fans, specifically the CF770WW02, CF770BC02, CF770BS02, CF770ORB02, and CF770OB02, exemplify a perfect blend of modern design and advanced functionality. These fans are tailored for those who seek elegance in their living spaces while ensuring optimal air circulation and comfort.

One of the standout features of the CF770 series is its sleek, minimalist design. Each model offers various color finishes such as white, black chrome, brushed steel, oil-rubbed bronze, and old bronze, allowing homeowners to select a fan that seamlessly integrates into their existing decor. The clean lines and contemporary aesthetics make these ceiling fans a stylish addition to any room, whether it be a modern dwelling or a classic home.

Functionality is a priority in the Emerson CF770 series. The fans are equipped with the proprietary EcoMotor, which not only ensures energy efficiency but also delivers powerful airflow while maintaining whisper-quiet operation. This is an essential feature for bedrooms and living areas where noise can be disruptive. The motor is designed to last, providing durable performance over time.

The CF770 models also offer a unique three-blade design, which enhances their aerodynamics, thus facilitating maximum air movement with minimal energy consumption. The blades are manufactured from high-quality materials and are meticulously balanced to ensure quiet operation, eliminating wobbles or vibrations that are ubiquitous in lesser fans.

Another noteworthy aspect of the Emerson CF770 series is its compatibility with a range of smart home technologies. Each fan can be easily integrated with smart home systems, allowing users to control the fan remotely via mobile apps or smart assistants. This offers unparalleled convenience, enabling you to set the desired airflow or schedule usage with simple voice commands.

The fans also come with a stylish remote control, which allows for quick adjustments to speed settings and lighting without having to leave the comfort of your couch or bed. The CF770 series is suitable for various mounting options, including flush mount and downrods, accommodating rooms with varying ceiling heights.

Overall, the Emerson CF770WW02, CF770BC02, CF770BS02, CF770ORB02, and CF770OB02 ceiling fans represent a harmonious blend of style, technology, and performance. Ideal for residential spaces that require comfort and modern flair, these fans offer functionality that meets the needs of today's consumer.