How to Wire Your Ceiling Fan, Wire Connector

How to Wire Your

Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire con- nectors supplied. (Figure 12.)

NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring.

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or acces- sories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 12). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 12). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

3.Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket.

4.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 13).

5.Secure the ceiling cover in place by sliding lock- washers over the threaded studs and installing the two knurled knobs (supplied). (Figure 13.) Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.

CEILING COVER

LOCKWASHERS (2) THREADED STUD

KNURLED KNOB

Figure 13

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

6.Connect the wood ball with chain to the 3-speed switch pull chain.

GROUND

WIRE

LISTED

BLACK AND BLUE FAN WIRES

WIRE

CONNECTOR (3)

GREEN WIRE (GROUND) FROM HANGER BRACKET

GREEN WIRE (GROUND) FROM HANGER BALL

WHITE SUPPLY (NEUTRAL)

WHITE FAN

WIRE

BLACK SUPPLY (HOT)

		NOTE: CEILING COVER
	Figure 12
		OMITTED FOR CLARITY.

CF770OB02, CF770ORB02, CF770AW02, CF770BC02, CF770BS02 specifications

The Emerson CF770 series ceiling fans, specifically the CF770WW02, CF770BC02, CF770BS02, CF770ORB02, and CF770OB02, exemplify a perfect blend of modern design and advanced functionality. These fans are tailored for those who seek elegance in their living spaces while ensuring optimal air circulation and comfort.

One of the standout features of the CF770 series is its sleek, minimalist design. Each model offers various color finishes such as white, black chrome, brushed steel, oil-rubbed bronze, and old bronze, allowing homeowners to select a fan that seamlessly integrates into their existing decor. The clean lines and contemporary aesthetics make these ceiling fans a stylish addition to any room, whether it be a modern dwelling or a classic home.

Functionality is a priority in the Emerson CF770 series. The fans are equipped with the proprietary EcoMotor, which not only ensures energy efficiency but also delivers powerful airflow while maintaining whisper-quiet operation. This is an essential feature for bedrooms and living areas where noise can be disruptive. The motor is designed to last, providing durable performance over time.

The CF770 models also offer a unique three-blade design, which enhances their aerodynamics, thus facilitating maximum air movement with minimal energy consumption. The blades are manufactured from high-quality materials and are meticulously balanced to ensure quiet operation, eliminating wobbles or vibrations that are ubiquitous in lesser fans.

Another noteworthy aspect of the Emerson CF770 series is its compatibility with a range of smart home technologies. Each fan can be easily integrated with smart home systems, allowing users to control the fan remotely via mobile apps or smart assistants. This offers unparalleled convenience, enabling you to set the desired airflow or schedule usage with simple voice commands.

The fans also come with a stylish remote control, which allows for quick adjustments to speed settings and lighting without having to leave the comfort of your couch or bed. The CF770 series is suitable for various mounting options, including flush mount and downrods, accommodating rooms with varying ceiling heights.

Overall, the Emerson CF770WW02, CF770BC02, CF770BS02, CF770ORB02, and CF770OB02 ceiling fans represent a harmonious blend of style, technology, and performance. Ideal for residential spaces that require comfort and modern flair, these fans offer functionality that meets the needs of today's consumer.