13.Remove one of the screws from the switch adapter. Retain for future installation. Loosen the two remaining screws in the switch adapter for installation of the switch housing cover plate (Figure 7).
14.Place the switch housing cover plate onto the switch adapter. Engage the keyholes of the switch housing cover plate by rotating the switch housing cover plate clockwise on the switch adapter. Retighten the two screws and reinstall the screw previously removed. Tighten all three screws securely (Figure 7).
15.Engage the connector of the switch housing assembly with the motor connector (Figure 8). The two connectors are keyed and
16.Remove the three switch housing screws from the switch housing cover plate. Position the switch housing assembly on the switch housing cover plate and align the holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the three screws (Figure 9).
NOTE: Do not pinch wires between the switch housing assembly and the switch housing plate.
17.You have now completed the assembly of your new ceiling fan. You can now proceed with hanging and wiring your fan.
REMOVE SWITCH | SWITCH HOUSING |
ADAPTER SCREW | COVER PLATE |
| LOOSEN SWITCH |
| ADAPTER |
SWITCH | SCREWS (2) |
ADAPTER |
|
Figure 7 |
|
SWITCH HOUSING |
ASSEMBLY |
SWITCH HOUSING |
ASSEMBLY |
CONNECTOR |
MOTOR HOUSING |
CONNECTOR |
Figure 8 |
SWITCH |
HOUSING |
ASSEMBLY |
SWITCH |
HOUSING |
SCREW (3) |
Figure 9
6 | U.L. Model No.: CF772 |