Safety Instructions

WARNING

To avoid fire, shock, and serious personal injury, follow these instructions.

1.Read your owner’s manual carefully and keep it for future reference.

2.Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel.

3.Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing.

4.Do not put anything into the fan blades while they are turning.

5.Do not operate reversing switch until fan blades have come to a complete stop.

Additional Safety Instructions for Installation

1.To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.

2.All wiring must be in accordance with the National Electrical Codes “ANSI/NFPA 70-1999” and Local Electrical Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed electrician.

3.The outlet box and joist must be securely mounted and capable of reliably supporting at least 50 pounds. Use only U.L. outlet boxes listed as “Acceptable for Fan Support”, and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

4.The downrod furnished with the fan proves the minimum recommended floor to fan blade clearance for an 8 foot ceiling.

5.The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with the fan blades.

6.Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not know enough about electrical wiring, have your fan installed by a licensed electrician.

NOTE: This fan is suitable for use with solid-state speed controls.

WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control SW46, manufactured by Rhine Electric Co., Ltd.

WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved for this fan.

WARNING: This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch.

THIS FAN IS SUITABLE FOR DAMP LOCATIONS SUCH AS

COVERED PORCHES, COVERED PATIOS, AND COVERED DECKS. . .

ANYWHERE THERE IS A ROOF OVERHEAD.

DATE CODE:

The date code of this fan may be found on the box, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use.

2	U.L. Model No.: CF765

CF765BS00, CF765WW00, CF765BQ00 specifications

The Emerson CF765 ceiling fans represent a blend of innovative design and cutting-edge technology, making them an attractive choice for modern homes. Available in three stylish finishes—white (CF765WW00), brushed steel (CF765BS00), and black (CF765BQ00)—these fans can seamlessly integrate into various interior designs, from contemporary to classic aesthetics.

One of the standout features of the Emerson CF765 series is its powerful motor. The fan is equipped with a high-performance, energy-efficient motor that ensures optimal airflow while consuming minimal energy. This not only helps to keep energy bills low but also contributes to a more sustainable lifestyle.

These fans come with a reversible motor, allowing homeowners to change the direction of the blades depending on the season. In the summer, the fan can be set to rotate counterclockwise, creating a cool breeze that helps to lower ambient temperatures. In the winter, the reversible function allows the blades to spin clockwise, redistributing warm air trapped near the ceiling down into the living space, enhancing comfort during colder months.

The Emerson CF765 series is designed with user convenience in mind. Each fan includes an easy-to-use remote control that allows users to adjust the fan speed and light settings with just the touch of a button. This feature is especially useful for maintaining comfort without the need for getting up from a seated position.

Additionally, the Emerson CF765 fans feature a sleek and aerodynamic blade design that not only contributes to their modern look but also maximizes air movement efficiency. The blades are made of high-quality materials, ensuring durability and reducing noise levels during operation, making these fans ideal for bedrooms, living rooms, and even home offices.

With a versatile blade span of 52 inches, the CF765 series can effectively cover larger spaces while providing ample airflow. The fans are compatible with a variety of light kits, giving users the option to further enhance their lighting setup, whether they prefer ambient or task lighting.

In summary, the Emerson CF765 ceiling fans—available in white, brushed steel, and black finishes—boast powerful, energy-efficient motors, reversible functionality, and a user-friendly remote control. Their stylish design and efficient cooling capabilities make them an excellent choice for any home, ensuring comfort throughout the year while making a statement in any room's decor.