Emerson CF765BQ00, CF765WW00, CF765BS00 How To Wire Your Ceiling Fan and Install Control, Assembly

Page 6

WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

 

OUTLET

 

BOX

TWO SCREWS

 

SUPPLIED WITH

HANGER

OUTLET BOX

BRACKET

 

Figure 8

TAB

 

2.Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box. Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 9).

WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

NOTE: CEILING COVER,

 

SUPPLY WIRES AND

OUTLET

FAN WIRES OMITTED

FOR CLARITY.

BOX

 

HANGER

 

BRACKET

 

HANGER BALL/

Figure 9

DOWNROD

ASSEMBLY

WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

How To Wire Your Ceiling

Fan and Install the

Control

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.

NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding wire from the hanger ball, the green grounding wire from the hanger bracket to the grounding conductor of the supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire connectors (supplied) (Figure 10).

BLACK

WHITE

SUPPLY

SUPPLY

(HOT)

(NEUTRAL)

BLACK FAN WIRE

WHITE

 

 

FAN WIRE

SUPPLY GROUND

 

WIRE

HANGER

GREEN WIRE

BRACKET

(GROUND) FROM

 

HANGER BALL

THREADED

GREEN WIRE (GROUND)

STUD (2)

FROM HANGER BRACKET

LISTED WIRE

 

Figure 10

CONNECTOR (3)

 

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 10). Securely connect the fan motor black wire to the supply black (hot) wire using wire connector supplied (Figure 10). After connections have been made, turn leads upward and carefully push the leads into the outlet box, with the wires spread apart and the white and green leads on one side of the outlet box and the black leads on the other side of the outlet box.

WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

6

U.L. Model No.: CF765

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Loft Safety Instructions Materials Unpacking InstructionsAssembly Instructions Electrical RequirementsHow To Hang Your Ceiling Fan How To Wire Your Ceiling Fan and Install Control AssemblyGeneral Using Your Ceiling Fan MaintenanceAccessories Trouble Shooting Energy Efficient Use of Ceiling FansRepair Parts Repair Parts Listing DescriptionLimited Warranty

CF765BS00, CF765WW00, CF765BQ00 specifications

The Emerson CF765 ceiling fans represent a blend of innovative design and cutting-edge technology, making them an attractive choice for modern homes. Available in three stylish finishes—white (CF765WW00), brushed steel (CF765BS00), and black (CF765BQ00)—these fans can seamlessly integrate into various interior designs, from contemporary to classic aesthetics.

One of the standout features of the Emerson CF765 series is its powerful motor. The fan is equipped with a high-performance, energy-efficient motor that ensures optimal airflow while consuming minimal energy. This not only helps to keep energy bills low but also contributes to a more sustainable lifestyle.

These fans come with a reversible motor, allowing homeowners to change the direction of the blades depending on the season. In the summer, the fan can be set to rotate counterclockwise, creating a cool breeze that helps to lower ambient temperatures. In the winter, the reversible function allows the blades to spin clockwise, redistributing warm air trapped near the ceiling down into the living space, enhancing comfort during colder months.

The Emerson CF765 series is designed with user convenience in mind. Each fan includes an easy-to-use remote control that allows users to adjust the fan speed and light settings with just the touch of a button. This feature is especially useful for maintaining comfort without the need for getting up from a seated position.

Additionally, the Emerson CF765 fans feature a sleek and aerodynamic blade design that not only contributes to their modern look but also maximizes air movement efficiency. The blades are made of high-quality materials, ensuring durability and reducing noise levels during operation, making these fans ideal for bedrooms, living rooms, and even home offices.

With a versatile blade span of 52 inches, the CF765 series can effectively cover larger spaces while providing ample airflow. The fans are compatible with a variety of light kits, giving users the option to further enhance their lighting setup, whether they prefer ambient or task lighting.

In summary, the Emerson CF765 ceiling fans—available in white, brushed steel, and black finishes—boast powerful, energy-efficient motors, reversible functionality, and a user-friendly remote control. Their stylish design and efficient cooling capabilities make them an excellent choice for any home, ensuring comfort throughout the year while making a statement in any room's decor.
Top Page Image Contents