Emerson CF750ORB00 owner manual Downrod Setscrew

Page 7

BP7333 CF750 MAYA ZEN 12/22/06 7:59 AM Page 7

NOTE: The longer downrod (8”) furnished with the fan provides the minimum recommended floor to fan blade clearance for a 9 foot ceiling.

NOTE: The shorter downrod (4.5”) must be used for an 8 foot ceiling and can not be used with the decorative upper scroll.

DOWNROD

SETSCREW (2)

MOTOR COUPLING

8. Loosen the two setscrews in motor coupling if necessary. Separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the desired downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 7). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the downrod to make sure the clevis pin is properly installed.

Figure 8

10.Unscrew and remove one lockwasher and screw from each end of the upper light plate cover on the fan motor housing. Do not remove the screw closest to the light holes (Figure 9).

NOTE: The screw closest to the light holes, holds the light socket to the light plate cover. Do not remove this screw.

REMOVE SCREW AND

LOCKWASHER

UPPER LIGHT

REMOVE SCREW AND PLATE COVER

LOCKWASHER

DOWNROD

HAIRPINPIN

CLIP

SETSCREW (2)

CLEVIS PIN

MOTOR

COUPLING

MOTOR

COUPLING

Figure 7

9. While pulling up on the downrod, securely tighten the two setscrews in the motor coupling (Figure 8).

NOTE: The two setscrews must be properly installed as described above, or fan wobble could result.

 

LIGHT HOLES

HINGE

DO NOT REMOVE LIGHT

Figure 9

SOCKET SCREW

 

11. Pull up on the upper light plate cover to expose the light socket. Place a 7- watt (maximum) candelabra base bulb (not supplied) into the light socket (Figure 10). Insert bulb into each of the remaining three sockets.

 

7-WATT (max.)

UPPER LIGHT

CANDELABRA

PLATE COVER

BASE BULB (4)

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the two setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed (as shown in Figure 6) could result in the fan falling.

Figure 10

LIGHT

SOCKET

 

12. Push the upper light plate cover down for each of the four light sockets and replace the lockwashers and screws previously removed in Step 10.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Maya ZEN Net Weight 28.6 LbsAdditional Safety Instructions for Installation Safety InstructionsDate Code Materials Tools Needed for AssemblyUnpacking Instructions Blades Hanger Ball How to Assemble Your Ceiling Fan Preliminary ProceduresElectrical Requirements Light KIT Assembly KEY Hole Downrod Setscrew Downrod Coupling TAB How to Hang Your Ceiling FanLicensed electrician How to Wire Your Ceiling FanSW105 Receiver Final Assembly Emerson Operating Your Ceiling Fan Important Care Instructions MaintenanceAccessoriesRepair Parts Key Part Numbers Model No Description CF750ORB00 Repair Parts ListingTrouble Probable Cause Suggested Remedy Trouble ShootingWhat The Warranty Covers Limited WarrantyAir Comfort Products

CF750ORB00 specifications

The Emerson CF750ORB00 is a prominent ceiling fan that combines innovative design, advanced technology, and exceptional performance to enhance any indoor space. This model stands out not just for its aesthetics but also for its functional capabilities, making it an ideal choice for homeowners seeking both style and efficiency.

One of the main features of the CF750ORB00 is its sleek and modern design. The fan boasts a rich oil-rubbed bronze finish that adds a touch of elegance and sophistication, allowing it to seamlessly blend with various interior decors. The fan's 52-inch blade span is perfect for providing ample airflow in medium to large rooms, achieving optimal comfort without overwhelming the room’s aesthetic.

Equipped with advanced technology, the Emerson CF750ORB00 employs a robust DC motor. This motor is highly efficient, using significantly less energy compared to traditional AC motors while producing strong and consistent airflow. The DC motor also enables the fan to operate quietly, making it suitable for bedrooms, living rooms, or offices where noise can be a concern. Furthermore, the fan features three distinct speed settings, allowing users to customize their comfort levels based on personal preference or seasonal requirements.

Another attractive attribute of the CF750ORB00 is its versatility in installation. The fan is designed for both standard and angled ceilings, ensuring that it can be installed in a wide variety of locations without compromising on performance or aesthetics. Additionally, the fan's integrated LED light fixture, which offers soft and warm illumination, elevates the overall functionality of the fan, providing both lighting and airflow.

The CF750ORB00 also includes a remote control, allowing for convenient operation from across the room. Users can easily adjust the fan speed and light settings, promoting hassle-free usage. The fan is designed to be eco-friendly as well, with its energy-efficient motor and LED lights contributing to energy savings.

Overall, the Emerson CF750ORB00 is a striking ceiling fan that enhances the ambiance of any room while offering superior functionality and energy efficiency. With its combination of aesthetic appeal, innovative features, and ease of use, this fan is a premiere choice for anyone looking to elevate their home’s comfort and style.
Top Page Image Contents