EN Measuring Functions
Measuring single distance
1 | 2 |
Aim active laser at target.
3
8.532 m
Target surfaces: Measuring errors can occur when meas-
iuring to colourless liquids, glass, styrofoam or
Permament / Minimum-Maximum measuring
1
2 sec
min.
2
max. |
The minimum and maximum dis- tance measured is displayed (min, max.). The last value meas- ured is displayed in the main line. 3
Stops permanent / mini-
Used to measure room diagonals (maximum val- | 8.532 m |
ues) or horizontal distance (minimum values) |
|
Add / Subtract
1
7.332 m
2
The next meas- urement is added to the previous one.
2x
The next meas- urement is sub- tracted from the previous one.
3
5.515 m 
12.847 m
The result is shown in the main line and the measured
ivalue above. This process can be repeated as required. The same process can be used for adding or subtracting areas or volumes.
8 | Milwaukee |